England · 73 postcode districts
Fire-Resistant Glass for Kent buildings
Our Kent fire-resistant glass service covers survey, supply and installation to the tested details, documented on handover.
E 30 – EI 120EnglandTNCTME
Quote for Kent
Tell us what you need. We reply with next steps and a guide price.
What our fire-resistant glass service includes in Kent
Fire-resistant glass is glazing that has been tested, as part of a complete glazed system, to hold back fire for a set time. It is classified by what it stops: E (integrity) keeps flames and hot gases on the fire side, EW also limits the heat radiated through the glass, and EI (integrity and insulation) also limits the temperature rise on the protected side, so people can pass it more safely.
- Impact-classified build-ups for critical locations
- Insulating (EI) intumescent-interlayer and gel-filled glass
- Glazing beads and fixings to the frame manufacturer's details
Before you order in Kent
Can any fire glass go in any fire-rated frame?
No. A frame is only rated with the glass types and pane sizes it was tested or assessed with. We check the frame's evidence before quoting, and if the existing frame is unknown we say so and price the options.
Weight and handling
Insulating fire glass gets thicker and heavier as the rating rises. Large EI 60 and EI 120 panes often need lifting equipment and a frame designed for the load, which we plan before the delivery date.
Impact safety still applies
Glass in doors, side panels and low-level positions has to meet impact safety rules as well as the fire rating. Most modern fire glass carries an impact classification; old wired glass usually does not.
Fire-Resistant Glass by town in Kent
Across Kent we can survey in Maidstone, Gillingham, Chatham, Royal Tunbridge Wells, Folkestone and every district in the TN, CT, ME, DA postcode areas.
Maidstone (ME14)Gillingham (ME7)Chatham (ME4)Royal Tunbridge Wells (TN1)Folkestone (CT19)Margate (CT9)Ashford (Kent) (TN24)Canterbury (CT1)Sittingbourne (ME10)Gravesend (DA12)Dartford (DA1)Ramsgate (CT11)Dover (CT16)Tonbridge (TN9)Strood (ME2)Whitstable (CT5)Deal (CT14)Sevenoaks (TN13)Rochester (ME1)Herne Bay (CT6)Broadstairs (CT10)Faversham (ME13)Swanley (BR8)
England rules for fire glazing
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Questions from Kent clients
What is the difference between E, EW and EI fire glass?
E is integrity only: it stops flames and hot gases passing for the rated time. EW adds a limit on radiated heat through the glass. EI adds insulation, keeping the unexposed face below set temperature rises so people can pass it safely. The number after the letters is the time in minutes.
Is toughened glass fire-resistant?
Ordinary toughened safety glass is not. It can shatter early in a fire. Fire-resistant integrity glass is specially processed or formulated and only gains a rating when fitted in a tested frame and glazing system.
Can you match glass that is already installed?
Often, yes. We read the marks on the existing panes and check them against the frame evidence. Where the original product is discontinued we look for an alternative covered by the same evidence or a formal assessment.
Do you cover all of Kent?
Yes. We take enquiries from across Kent, including Maidstone and Gillingham, Chatham, Royal Tunbridge Wells, Folkestone, and arrange surveys to suit your programme.
Related
Related services in Kent
Process
How a Kent job runs
Tell us what you have
Send drawings, a fire risk assessment action or photos of the glass marks.
Survey
We visit Kent to measure, record existing marks and check the frames and substrate.
Written quote
You receive a written quote naming the tested system and classification.
Fit and record
We install, photograph seals and fixings before closing up, and hand over the schedule.