30 / 60 min
Fanlights, Side Panels & Borrowed Lights
Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →
E 30 to EI 60
Timber Fire-Rated Screens
Timber fire-rated screens are glazed partitions made with hardwood frames, glazing beads and intumescent seals that have been tested together to resist fire. They are common in schools, healthcare, heritage buildings and residential blocks where a warmer finish is wanted.
E 30EI 60
Get a free survey or quote
Tell us what you need. We reply with next steps and a guide price.
- Free quotation visitfor installation work
- Written quotesafter survey, for the agreed scope
- UK-wide coverageall four nations
- Tested systems onlyglass, frame, seals as tested
- Evidence on handoverclassifications and photos
What does our timber fire-rated screens service include?
The rating depends on the timber species and density, frame sections, bead profiles, fixings and the glazing seals used in the test. We build timber screens to a tested specification, or to a formal assessment, and finish them without compromising the intumescent details.
- Hardwood frames to tested sections and densities
- Fire glass with the specified intumescent glazing system
- Fire-rated timber doorsets set into screens
- Over-panels, side panels and borrowed lights
- Painted, stained or lacquered finishes
- Fire-stopping to the structure
What should you check before ordering?
Species and density count
Timber screens are tested with specific species and minimum densities. Softwood substitutions or thinner sections can fall outside the evidence.
Beads are part of the rating
Bead profile, height and fixing type and spacing are all taken from the test. Short-cutting the fixings is a common reason screens fail inspection.
Heritage buildings
Timber suits listed and older buildings, and existing screens can sometimes be upgraded with new glass and seals, subject to an assessment of the frame.
Finishing
Paint and stain are fine on the timber, but intumescent seals must stay clear of paint. We mask them during finishing.
Moisture and movement
Timber frames need dry conditions on site and acclimatisation before glazing to avoid movement around the glass.
Insulating glass weight
Heavier insulating glass may need larger sections; we confirm the frame can carry the chosen build-up.
What evidence do you get?
- Timber screen test or assessment reference
- Timber species and section schedule
- Glazing and seal specification
- Installation photographs and installer's completion record
Guide prices for timber fire-rated screens
Timber screens typically £550–£1,000/m² supplied and installed, excluding VAT. Prices depend on the rating, pane sizes, frame system, access and programme. Use the guide price tool for a range, or see all guide prices.
Frequently asked questions
Can timber screens be fire-rated?
Yes. Hardwood screens are tested to 30 and 60 minutes in many configurations, with the right glass, beads and seals.
Can you upgrade an old timber screen?
Sometimes. If the frame can be shown to be suitable, we can replace non-rated glass and add the correct seals and beads. Where it cannot, replacement is the honest answer.
Which timbers are used?
Dense hardwoods are typical; the exact species depends on the tested specification. We confirm species and density on the drawings.
Can timber screens be painted?
Yes. The timber can be painted, stained or lacquered. Intumescent seals are kept clear of paint.
Related services
Often specified alongside timber fire-rated screens
FD30 / FD60
Fire-Rated Glazed Doors
Doorsets with large glazed panels, tested as complete units.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →
to door rating
Fire Door Vision Panels
Replacement and new vision panels fitted to the door's evidence.
Learn more →Areas
Timber Fire-Rated Screens by area
Select your county or region for local coverage, towns and the rules that apply there.
England
BedfordshireBerkshireBristolBuckinghamshireCambridgeshireCheshireCornwallCounty DurhamCumbriaDerbyshireDevonDorsetEast Riding of YorkshireEast SussexEssexGloucestershireGreater LondonGreater ManchesterHampshireHerefordshireHertfordshireIsle of WightKentLancashireLeicestershireLincolnshireMerseysideNorfolkNorth YorkshireNorthamptonshireNorthumberlandNottinghamshireOxfordshireRutlandShropshireSomersetSouth YorkshireStaffordshireSuffolkSurreyTyne and WearWarwickshireWest MidlandsWest SussexWest YorkshireWiltshireWorcestershire
Scotland
Process
How we deliver timber fire-rated screens
Tell us what you need
Send sizes, the rating required, photos of glass marks or your inspection report.
Survey
We measure, record existing marks and check frames, substrates and fire-stopping.
Written quote
Your quote names the tested system, classification and evidence it relies on.
Install and hand over
Installed to the system details, then a handover pack with photographs and references.