EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
Kent · TN24
Fire-Resistant Glass in Ashford (Kent)
Looking for fire-resistant glass in Ashford (Kent)? We survey, supply and install tested fire-rated glazing for retail and leisure units, schools and colleges and other buildings in and around Ashford (Kent), including the TN24 postcode district.
E 30 – EI 120TN24England
Quote for Ashford (Kent)
Tell us what you need. We reply with next steps and a guide price.
Fire-Resistant Glass in Ashford (Kent): what's included
We supply and fit fire-resistant glass into new and existing fire-rated frames, matching the glass type, thickness, beads, seals and fixings to the test or assessment evidence for that frame. The glass on its own does not carry a rating; the combination does, so we start every job by identifying the system you have or need.
- Impact-classified build-ups for critical locations
- Insulating (EI) intumescent-interlayer and gel-filled glass
- Intumescent glazing seals, tapes and gaskets to the tested specification
- Integrity with radiation control (EW) laminated glass
What every Ashford (Kent) quote includes
Evidence you can file
You receive the classification references, glass marks and installation photographs for your fire safety records.
Honest about unknowns
If an existing frame in a Ashford (Kent) building has no traceable evidence, we say so and price the options rather than guess.
Rated systems, not just rated glass
Every quote in Ashford (Kent) identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
What to check before ordering fire-resistant glass in Ashford (Kent)
Can any fire glass go in any fire-rated frame?
No. A frame is only rated with the glass types and pane sizes it was tested or assessed with. We check the frame's evidence before quoting, and if the existing frame is unknown we say so and price the options.
Marking and records
Most fire glass is permanently marked with its product and classification. We record the marks, pane sizes and evidence references on handover so whoever is responsible for fire safety can show what is installed.
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Where we work around Ashford (Kent)
Whether the building is in central Ashford (Kent) or the wider TN24, TN23, TN25 districts, we can survey and quote. We also cover Faversham, Canterbury, Folkestone. Maidstone, around 28 km from Ashford (Kent), is the largest town in the same coverage area.
Fire glass in FavershamFire glass in CanterburyFire glass in FolkestoneFire glass in SittingbourneFire glass in Whitstable
Which rules apply to fire-resistant glass in Ashford (Kent)?
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Ashford (Kent) building types
Sector guides below cover retail and leisure units, schools and colleges and other buildings in Ashford (Kent).
FAQs for Ashford (Kent)
How thick is fire-resistant glass?
Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.
Is toughened glass fire-resistant?
Ordinary toughened safety glass is not. It can shatter early in a fire. Fire-resistant integrity glass is specially processed or formulated and only gains a rating when fitted in a tested frame and glazing system.
Do you carry out fire-resistant glass in Ashford (Kent)?
Yes. We survey and install in Ashford (Kent) and across Kent, including the TN24 district and nearby Faversham.
Which rules apply to fire-rated glazing in Ashford (Kent)?
Building work in Ashford (Kent) follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Related
Related services in Ashford (Kent)
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
How a Ashford (Kent) job runs
Start with the brief
Tell us the rating required, sizes and building type, or ask us to find out.
Site visit
A survey in Ashford (Kent) confirms sizes, access, existing evidence and fixing conditions.
Written quote
You receive a written quote naming the tested system and classification.
Install and hand over
Installation to the system details, then a handover pack with photographs and evidence.