Fanlights, Side Panels & Borrowed Lights
Fanlights & side panels in Lincoln and nearby
View details →Our Lincolnshire timber fire-rated screens service covers survey, supply and installation to the tested details, documented on handover.
Tell us what you need. We reply with next steps and a guide price.

Timber fire-rated screens are glazed partitions made with hardwood frames, glazing beads and intumescent seals that have been tested together to resist fire. They are common in schools, healthcare, heritage buildings and residential blocks where a warmer finish is wanted.
Bead profile, height and fixing type and spacing are all taken from the test. Short-cutting the fixings is a common reason screens fail inspection.
Paint and stain are fine on the timber, but intumescent seals must stay clear of paint. We mask them during finishing.
Timber frames need dry conditions on site and acclimatisation before glazing to avoid movement around the glass.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Our Lincolnshire coverage spans 46 postcode districts across the DN, LN, PE, NG postcode areas.
Sometimes. If the frame can be shown to be suitable, we can replace non-rated glass and add the correct seals and beads. Where it cannot, replacement is the honest answer.
Yes. Hardwood screens are tested to 30 and 60 minutes in many configurations, with the right glass, beads and seals.
Yes. The timber can be painted, stained or lacquered. Intumescent seals are kept clear of paint.
Yes. We can arrange surveys anywhere in Lincolnshire, including Lincoln and Grimsby, Scunthorpe, Boston, Grantham.
Fanlights & side panels in Lincoln and nearby
View details →Tell us the rating required, sizes and building type, or ask us to find out.
We visit Lincolnshire to measure, record existing marks and check the frames and substrate.
Your quote lists each item with its classification and the evidence it relies on.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.