Fanlights, Side Panels & Borrowed Lights
Fanlights & side panels in York and nearby
View details →Timber fire-rated screens across North Yorkshire covers 58 postcode districts in the YO, TS, DL, HG postcode areas. Every job is built around a tested system.
Tell us what you need. We reply with next steps and a guide price.
The rating depends on the timber species and density, frame sections, bead profiles, fixings and the glazing seals used in the test. We build timber screens to a tested specification, or to a formal assessment, and finish them without compromising the intumescent details.
Heavier insulating glass may need larger sections; we confirm the frame can carry the chosen build-up.
Paint and stain are fine on the timber, but intumescent seals must stay clear of paint. We mask them during finishing.
Bead profile, height and fixing type and spacing are all taken from the test. Short-cutting the fixings is a common reason screens fail inspection.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Our North Yorkshire coverage spans 58 postcode districts across the YO, TS, DL, HG postcode areas.
Sometimes. If the frame can be shown to be suitable, we can replace non-rated glass and add the correct seals and beads. Where it cannot, replacement is the honest answer.
Yes. Hardwood screens are tested to 30 and 60 minutes in many configurations, with the right glass, beads and seals.
Yes. The timber can be painted, stained or lacquered. Intumescent seals are kept clear of paint.
Yes. We take enquiries from across North Yorkshire, including York and Middlesbrough, Harrogate, Scarborough, Redcar, and arrange surveys to suit your programme.
Fanlights & side panels in York and nearby
View details →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in North Yorkshire and check what the existing frames can accept.
You receive a written quote naming the tested system and classification.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.