EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
Isle of Wight · PO33
Ryde fire-resistant glass
From the PO33 district outwards, we arrange fire-resistant glass for buildings across Ryde, matching glass, frames and seals to tested evidence rather than guesswork.
E 30 – EI 120PO33England
Quote for Ryde
Tell us what you need. We reply with next steps and a guide price.
What's involved with fire-resistant glass in Ryde
We supply and fit fire-resistant glass into new and existing fire-rated frames, matching the glass type, thickness, beads, seals and fixings to the test or assessment evidence for that frame. The glass on its own does not carry a rating; the combination does, so we start every job by identifying the system you have or need.
- Integrity with radiation control (EW) laminated glass
- Insulating (EI) intumescent-interlayer and gel-filled glass
- Impact-classified build-ups for critical locations
- Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
What to check before ordering fire-resistant glass in Ryde
Weight and handling
Insulating fire glass gets thicker and heavier as the rating rises. Large EI 60 and EI 120 panes often need lifting equipment and a frame designed for the load, which we plan before the delivery date.
Impact safety still applies
Glass in doors, side panels and low-level positions has to meet impact safety rules as well as the fire rating. Most modern fire glass carries an impact classification; old wired glass usually does not.
Can any fire glass go in any fire-rated frame?
No. A frame is only rated with the glass types and pane sizes it was tested or assessed with. We check the frame's evidence before quoting, and if the existing frame is unknown we say so and price the options.
Fire glazing rules in England
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Where we work around Ryde
Coverage around Ryde includes the PO33, PO34 districts and nearby Gosport, Sandown, Portsmouth. Newport, around 10 km from Ryde, is the largest town in the same coverage area.
Fire glass in GosportFire glass in SandownFire glass in PortsmouthFire glass in NewportFire glass in Cowes
What every Ryde quote includes
Honest about unknowns
If an existing frame in a Ryde building has no traceable evidence, we say so and price the options rather than guess.
Evidence you can file
You receive the classification references, glass marks and installation photographs for your fire safety records.
Fixed written quotes
After survey you get a fixed written quote for the agreed scope, so Ryde budgets are not open-ended.
Building types we cover in Ryde
Sector guides below cover care homes, hotels and other buildings in Ryde.
Fire-Resistant Glass: Ryde questions
Do you supply fire glass only?
Our service is supply and installation, because the rating depends on how the glass is fitted. For trade buyers we can quote supply of cut-to-size panes with the matching glazing materials on request.
How thick is fire-resistant glass?
Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.
Do you carry out fire-resistant glass in Ryde?
Yes. We survey and install in Ryde and across Isle of Wight, including the PO33 district and nearby Gosport.
Can you price fire-resistant glass in Ryde from photos?
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Related
Related services in Ryde
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
From enquiry to handover in Ryde
Tell us what you have
Send drawings, a fire risk assessment action or photos of the glass marks.
Survey
We visit Ryde to measure, record existing marks and check the frames and substrate.
Written proposal
We set out the system, glass, evidence and programme, with a fixed price.
Install and hand over
Installation to the system details, then a handover pack with photographs and evidence.