EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
Isle of Wight · PO36
Fire-Resistant Glass — Sandown and PO36
Looking for fire-resistant glass in Sandown? We survey, supply and install tested fire-rated glazing for care homes, industrial units and other buildings in and around Sandown, including the PO36 postcode district.
E 30 – EI 120PO36England
Quote for Sandown
Tell us what you need. We reply with next steps and a guide price.
What our fire-resistant glass service includes in Sandown
We supply and fit fire-resistant glass into new and existing fire-rated frames, matching the glass type, thickness, beads, seals and fixings to the test or assessment evidence for that frame. The glass on its own does not carry a rating; the combination does, so we start every job by identifying the system you have or need.
- Insulating (EI) intumescent-interlayer and gel-filled glass
- Glazing beads and fixings to the frame manufacturer's details
- Intumescent glazing seals, tapes and gaskets to the tested specification
- Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
Before you order fire-resistant glass: what matters
Inside or outside?
Many insulating fire glasses use interlayers that need protecting from UV and moisture, so external positions need a product approved for exterior use, with the right edge seal and glazing system.
Weight and handling
Insulating fire glass gets thicker and heavier as the rating rises. Large EI 60 and EI 120 panes often need lifting equipment and a frame designed for the load, which we plan before the delivery date.
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Which rules apply to fire-resistant glass in Sandown?
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Sandown coverage and nearby towns
Survey visits can be arranged anywhere in Sandown, including the PO36, PO37 districts, and in nearby Ryde, Newport, Cowes. Newport, around 11 km from Sandown, is the largest town in the same coverage area.
Fire glass in RydeFire glass in NewportFire glass in CowesFire glass in GosportFire glass in Portsmouth
How we work in Sandown
Evidence you can file
You receive the classification references, glass marks and installation photographs for your fire safety records.
Honest about unknowns
If an existing frame in a Sandown building has no traceable evidence, we say so and price the options rather than guess.
Fixed written quotes
After survey you get a fixed written quote for the agreed scope, so Sandown budgets are not open-ended.
Sandown building types
Sector guides below cover care homes, industrial units and other buildings in Sandown.
Questions about fire-resistant glass in Sandown
Can you match glass that is already installed?
Often, yes. We read the marks on the existing panes and check them against the frame evidence. Where the original product is discontinued we look for an alternative covered by the same evidence or a formal assessment.
What is the difference between E, EW and EI fire glass?
E is integrity only: it stops flames and hot gases passing for the rated time. EW adds a limit on radiated heat through the glass. EI adds insulation, keeping the unexposed face below set temperature rises so people can pass it safely. The number after the letters is the time in minutes.
Do you work on occupied buildings in Sandown?
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Can you price fire-resistant glass in Sandown from photos?
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Related
Related services in Sandown
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
From enquiry to handover in Sandown
Tell us what you have
Send drawings, a fire risk assessment action or photos of the glass marks.
Measure and check
We measure each opening in Sandown and check what the existing frames can accept.
Written proposal
We set out the system, glass, evidence and programme, with a fixed price.
Install and hand over
Installation to the system details, then a handover pack with photographs and evidence.