E 30 – EI 120
Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →
Isle of Wight · PO33
Insulated Fire Glass (EI) for Ryde buildings
When a fire strategy, inspection report or building control comment in Ryde calls for glazing tested to resist fire, our insulated fire glass service covers survey, supply and installation.
EI 30 – EI 120PO33England
Quote for Ryde
Tell us what you need. We reply with next steps and a guide price.
Insulated Fire Glass (EI) in Ryde: what's included
EI glass is the choice where people need to pass close to the glass during a fire, where combustible materials sit near it, or where building guidance would otherwise restrict glazing. We supply and fit EI 30 to EI 120 glass in tested frames, internally and externally.
- Matched glazing systems and seals
- Handling and installation of heavy panes
- EI 30, EI 60, EI 90 and EI 120 glass
- Insulating glass in sealed double-glazed units
What to check before ordering insulated fire glass in Ryde
The temperature rule
EI testing limits the average temperature rise on the unexposed face to 140°C and any single point to 180°C, which is why people can pass it.
Exterior positions
Some EI products are internal only. External use needs a product and edge seal approved for UV and weather.
Thickness and weight
Each step up in rating adds layers, so EI 120 is far thicker and heavier than EI 30. The frame has to be designed for it.
Where we work around Ryde
Our Isle of Wight coverage takes in Ryde (PO33, PO34) and the neighbouring towns of Gosport, Sandown, Portsmouth. Newport, around 10 km from Ryde, is the largest town in the same coverage area.
How we work in Ryde
Fixed written quotes
After survey you get a fixed written quote for the agreed scope, so Ryde budgets are not open-ended.
England rules applied
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Honest about unknowns
If an existing frame in a Ryde building has no traceable evidence, we say so and price the options rather than guess.
Which rules apply to insulated fire glass in Ryde?
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Building types we cover in Ryde
We can survey and quote for blocks of flats, care homes and other building types in Ryde.
Questions about insulated fire glass in Ryde
Does EI glass need replacing after a fire?
Yes. Once the interlayers have reacted, the glass has done its job and must be replaced.
What does EI 60 mean?
The glazing system kept fire on one side (integrity) and limited the temperature rise on the other side (insulation) for at least 60 minutes in a standard fire test.
Can you price insulated fire glass in Ryde from photos?
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
How quickly can you survey in Ryde?
Survey timing in Ryde depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Related
Related services in Ryde
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
E 30 – EI 60
Stair, Lobby & Corridor Glazing
Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →
E 30 – EI 60
Frameless Fire-Rated Glazing
Butt-jointed fire glass walls with minimal frames.
Learn more →Process
From enquiry to handover in Ryde
Start with the brief
Tell us the rating required, sizes and building type, or ask us to find out.
Measure and check
We measure each opening in Ryde and check what the existing frames can accept.
Quote and evidence
Your quote lists each item with its classification and the evidence it relies on.
Fit and record
We install, photograph seals and fixings before closing up, and hand over the schedule.