Fire Glazing Remedial Works
Putting right the defects found in surveys and fire risk assessments.
Learn more →If a building in Sunbury-on-Thames needs fire glazing surveys, the starting point is the rating its fire strategy requires. We confirm that, survey the openings and quote a tested system to suit.
Tell us what you need. We reply with next steps and a guide price.
A fire glazing survey is a non-destructive inspection of the glazed screens, doors, panels and windows in fire-resisting walls, recording what glass and frames are installed, whether they appear consistent with the required rating, and what defects need putting right.
Every quote in Sunbury-on-Thames identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
After survey you get a fixed written quote for the agreed scope, so Sunbury-on-Thames budgets are not open-ended.
You receive the classification references, glass marks and installation photographs for your fire safety records.
Surveys often follow a fire risk assessment action. We address the specific items raised.
Unmarked or ordinary glass in fire-resisting walls, missing seals, painted-over intumescent strips, wrong beads and unsealed service holes are frequent findings.
We can re-inspect after remedial work and update the schedule.
Whether the building is in central Sunbury-on-Thames or the wider TW16, TW17, KT12, TW12, KT8, TW15 districts, we can survey and quote. We also cover Walton-on-Thames, Hampton, Hanworth. Woking, around 14 km from Sunbury-on-Thames, is the largest town in the same coverage area.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Sector guides below cover blocks of flats, retail and leisure units and other buildings in Sunbury-on-Thames.
Building owners, managing agents, those responsible for fire safety and contractors who need to know whether glazing in fire-resisting walls and doors is suitable.
It can confirm what is visible and recorded, and identify defects. Proving a rating may need manufacturer evidence or an assessment from a test body.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Building work in Sunbury-on-Thames follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Putting right the defects found in surveys and fire risk assessments.
Learn more →Replace old Georgian wired glass with modern fire glass.
Learn more →Cracked or broken fire glass replaced to the original specification.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We measure each opening in Sunbury-on-Thames and check what the existing frames can accept.
We set out the system, glass, evidence and programme, with a fixed price.
Work is completed to the manufacturer's details and documented for your records.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.