Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →For Sunbury-on-Thames buildings, we supply, replace and check fire glass replacement wherever the fire strategy depends on it, working to the tested system rather than the glass alone.
Tell us what you need. We reply with next steps and a guide price.
We identify the existing glass from its marks, measure the opening, make the area safe and fit the correct replacement. If the original product is no longer made, we source an alternative covered by the frame's evidence or advise on the right next step.
Repeated breakage can point to frame movement, door slamming or impact from trolleys. We look at the cause.
Whoever is responsible for fire safety may need temporary measures until the new pane is fitted; we can advise on practical options.
Most fire glass is etched or printed with its product name and classification. A photo of the mark speeds up quoting.
Survey visits can be arranged anywhere in Sunbury-on-Thames, including the TW16, TW17, KT12, TW12, KT8, TW15 districts, and in nearby Walton-on-Thames, Hampton, Hanworth. Woking, around 14 km from Sunbury-on-Thames, is the largest town in the same coverage area.
You receive the classification references, glass marks and installation photographs for your fire safety records.
We can phase work in Sunbury-on-Thames around residents, staff or pupils, with out-of-hours options.
If an existing frame in a Sunbury-on-Thames building has no traceable evidence, we say so and price the options rather than guess.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Sector guides below cover offices, retail and leisure units and other buildings in Sunbury-on-Thames.
Look for an etched or printed mark in a corner of the pane. Send us a photo with the approximate size.
Yes. Single panes can be replaced on their own, provided the replacement is compatible with the frame's evidence.
Survey timing in Sunbury-on-Thames depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Building work in Sunbury-on-Thames follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We visit Sunbury-on-Thames to measure, record existing marks and check the frames and substrate.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.