Fire Door Vision Panels
Replacement and new vision panels fitted to the door's evidence.
Learn more →For Sunbury-on-Thames buildings, we supply, replace and check wired glass replacement wherever the fire strategy depends on it, working to the tested system rather than the glass alone.
Tell us what you need. We reply with next steps and a guide price.
Wired glass replacement means removing old Georgian or polished wired glass from doors, screens and panels and fitting modern fire-resistant glass that keeps the fire rating while meeting today's impact safety expectations. Wired glass holds together in a fire because of the mesh, but plain wired glass usually lacks an impact safety classification and can cause serious injuries when broken by impact.
Our Surrey coverage takes in Sunbury-on-Thames (TW16, TW17, KT12, TW12, KT8, TW15) and the neighbouring towns of Walton-on-Thames, Hampton, Hanworth. Sunbury-on-Thames is about 14 km from Woking, the largest town in our Surrey coverage.
Wired glass breaks into sharp pieces held by wire, and the wire weakens the glass. In doors and low-level panels it is a common source of hand and arm injuries.
Doors, side panels and low-level glazing in busy corridors, sports halls and schools are usually replaced first.
We can replace wired glass over holidays, weekends or zone by zone to keep the building running.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
After survey you get a fixed written quote for the agreed scope, so Sunbury-on-Thames budgets are not open-ended.
Every quote in Sunbury-on-Thames identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Wired glass replacement applies to many building types in Sunbury-on-Thames, including industrial units and retail and leisure units.
Clear modern integrity or insulating fire glass with an impact classification, compatible with the frame.
When broken by impact it can cause serious cuts. That is why it is often replaced in doors and low-level positions.
Yes. We survey and install in Sunbury-on-Thames and across Surrey, including the TW16 district and nearby Walton-on-Thames.
Survey timing in Sunbury-on-Thames depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Replacement and new vision panels fitted to the door's evidence.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →Tell us the rating required, sizes and building type, or ask us to find out.
We measure each opening in Sunbury-on-Thames and check what the existing frames can accept.
We set out the system, glass, evidence and programme, with a fixed price.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.