Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Looking for insulated fire glass in Isleworth? We survey, supply and install tested fire-rated glazing for hotels, retail and leisure units and other buildings in and around Isleworth, including the TW7 postcode district.
Tell us what you need. We reply with next steps and a guide price.
Insulated fire glass, classified EI, is glazing that maintains integrity and keeps the temperature rise on the non-fire side within set limits for the rated time. It is usually made of several glass panes bonded with interlayers that foam into an insulating barrier when heated, or with a clear gel that absorbs heat.
Our Greater London coverage takes in Isleworth (TW7, TW4, TW3, TW8, TW9, UB2) and the neighbouring towns of Hounslow, Heston, Richmond. Isleworth sits within our Greater London coverage, alongside Hounslow.
Some EI products are internal only. External use needs a product and edge seal approved for UV and weather.
Each step up in rating adds layers, so EI 120 is far thicker and heavier than EI 30. The frame has to be designed for it.
EI testing limits the average temperature rise on the unexposed face to 140°C and any single point to 180°C, which is why people can pass it.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
You receive the classification references, glass marks and installation photographs for your fire safety records.
Every quote in Isleworth identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in Isleworth around residents, staff or pupils, with out-of-hours options.
Insulated fire glass applies to many building types in Isleworth, including hotels and retail and leisure units.
Only products approved for external use, usually in a sealed unit with UV protection.
It is a multi-layer product with specialist interlayers, and the frame and installation must suit its weight.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Yes. We survey and install in Isleworth and across Greater London, including the TW7 district and nearby Hounslow.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Butt-jointed fire glass walls with minimal frames.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We visit Isleworth to measure, record existing marks and check the frames and substrate.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.