EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
Essex · SS1
Fire-Resistant Glass in Southend-on-Sea, Essex
When a fire strategy, inspection report or building control comment in Southend-on-Sea calls for glazing tested to resist fire, our fire-resistant glass service covers survey, supply and installation.
E 30 – EI 120SS1England
Quote for Southend-on-Sea
Tell us what you need. We reply with next steps and a guide price.
What's involved with fire-resistant glass in Southend-on-Sea
We supply and fit fire-resistant glass into new and existing fire-rated frames, matching the glass type, thickness, beads, seals and fixings to the test or assessment evidence for that frame. The glass on its own does not carry a rating; the combination does, so we start every job by identifying the system you have or need.
- Glazing beads and fixings to the frame manufacturer's details
- Impact-classified build-ups for critical locations
- Insulating (EI) intumescent-interlayer and gel-filled glass
- Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
Key checks for Southend-on-Sea projects
Marking and records
Most fire glass is permanently marked with its product and classification. We record the marks, pane sizes and evidence references on handover so whoever is responsible for fire safety can show what is installed.
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Impact safety still applies
Glass in doors, side panels and low-level positions has to meet impact safety rules as well as the fire rating. Most modern fire glass carries an impact classification; old wired glass usually does not.
Where we work around Southend-on-Sea
Coverage around Southend-on-Sea includes the SS1, SS2, SS22, SS0, SS9 districts and nearby Rayleigh, Canvey Island, South Benfleet. Southend-on-Sea is the main town we cover in Essex.
Fire glass in RayleighFire glass in Canvey IslandFire glass in South BenfleetFire glass in PitseaFire glass in Wickford
What every Southend-on-Sea quote includes
Evidence you can file
You receive the classification references, glass marks and installation photographs for your fire safety records.
Work around occupied buildings
We can phase work in Southend-on-Sea around residents, staff or pupils, with out-of-hours options.
Fixed written quotes
After survey you get a fixed written quote for the agreed scope, so Southend-on-Sea budgets are not open-ended.
Fire glazing rules in England
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Building types we cover in Southend-on-Sea
Sector guides below cover hotels, student accommodation and other buildings in Southend-on-Sea.
FAQs for Southend-on-Sea
What is the difference between E, EW and EI fire glass?
E is integrity only: it stops flames and hot gases passing for the rated time. EW adds a limit on radiated heat through the glass. EI adds insulation, keeping the unexposed face below set temperature rises so people can pass it safely. The number after the letters is the time in minutes.
How thick is fire-resistant glass?
Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.
Do you work on occupied buildings in Southend-on-Sea?
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Which rules apply to fire-rated glazing in Southend-on-Sea?
Building work in Southend-on-Sea follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Related
Related services in Southend-on-Sea
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
How a Southend-on-Sea job runs
Start with the brief
Tell us the rating required, sizes and building type, or ask us to find out.
Measure and check
We measure each opening in Southend-on-Sea and check what the existing frames can accept.
Written quote
You receive a written quote naming the tested system and classification.
Fit and record
We install, photograph seals and fixings before closing up, and hand over the schedule.