EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
Essex · SS13
Fire-Resistant Glass for Pitsea buildings
When a fire strategy, inspection report or building control comment in Pitsea calls for glazing tested to resist fire, our fire-resistant glass service covers survey, supply and installation.
E 30 – EI 120SS13England
Quote for Pitsea
Tell us what you need. We reply with next steps and a guide price.
What's involved with fire-resistant glass in Pitsea
Fire-resistant glass is glazing that has been tested, as part of a complete glazed system, to hold back fire for a set time. It is classified by what it stops: E (integrity) keeps flames and hot gases on the fire side, EW also limits the heat radiated through the glass, and EI (integrity and insulation) also limits the temperature rise on the protected side, so people can pass it more safely.
- Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
- Integrity with radiation control (EW) laminated glass
- Impact-classified build-ups for critical locations
- Intumescent glazing seals, tapes and gaskets to the tested specification
How we work in Pitsea
Work around occupied buildings
We can phase work in Pitsea around residents, staff or pupils, with out-of-hours options.
England rules applied
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Rated systems, not just rated glass
Every quote in Pitsea identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
What to check before ordering fire-resistant glass in Pitsea
Can any fire glass go in any fire-rated frame?
No. A frame is only rated with the glass types and pane sizes it was tested or assessed with. We check the frame's evidence before quoting, and if the existing frame is unknown we say so and price the options.
Marking and records
Most fire glass is permanently marked with its product and classification. We record the marks, pane sizes and evidence references on handover so whoever is responsible for fire safety can show what is installed.
Inside or outside?
Many insulating fire glasses use interlayers that need protecting from UV and moisture, so external positions need a product approved for exterior use, with the right edge seal and glazing system.
Where we work around Pitsea
Coverage around Pitsea includes the SS13, SS14, SS16, SS12 districts and nearby Basildon, South Benfleet, Wickford. Pitsea lies roughly 15 km from Southend-on-Sea, within our Essex coverage.
Fire glass in BasildonFire glass in South BenfleetFire glass in WickfordFire glass in Canvey IslandFire glass in Stanford-le-Hope
Which rules apply to fire-resistant glass in Pitsea?
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Pitsea building types
Sector guides below cover care homes, retail and leisure units and other buildings in Pitsea.
FAQs for Pitsea
Do you supply fire glass only?
Our service is supply and installation, because the rating depends on how the glass is fitted. For trade buyers we can quote supply of cut-to-size panes with the matching glazing materials on request.
How thick is fire-resistant glass?
Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.
How quickly can you survey in Pitsea?
Survey timing in Pitsea depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Can you price fire-resistant glass in Pitsea from photos?
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Related
Related services in Pitsea
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
How a Pitsea job runs
Start with the brief
Tell us the rating required, sizes and building type, or ask us to find out.
Measure and check
We measure each opening in Pitsea and check what the existing frames can accept.
Quote and evidence
Your quote lists each item with its classification and the evidence it relies on.
Fit and record
We install, photograph seals and fixings before closing up, and hand over the schedule.