EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
Essex · SS6
Fire-Resistant Glass for Rayleigh buildings
For Rayleigh buildings, we supply, replace and check fire-resistant glass wherever the fire strategy depends on it, working to the tested system rather than the glass alone.
E 30 – EI 120SS6England
Quote for Rayleigh
Tell us what you need. We reply with next steps and a guide price.
Fire-Resistant Glass in Rayleigh: what's included
We supply and fit fire-resistant glass into new and existing fire-rated frames, matching the glass type, thickness, beads, seals and fixings to the test or assessment evidence for that frame. The glass on its own does not carry a rating; the combination does, so we start every job by identifying the system you have or need.
- Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
- Intumescent glazing seals, tapes and gaskets to the tested specification
- Glazing beads and fixings to the frame manufacturer's details
- Integrity with radiation control (EW) laminated glass
What every Rayleigh quote includes
Rated systems, not just rated glass
Every quote in Rayleigh identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Evidence you can file
You receive the classification references, glass marks and installation photographs for your fire safety records.
Work around occupied buildings
We can phase work in Rayleigh around residents, staff or pupils, with out-of-hours options.
Before you order fire-resistant glass: what matters
Inside or outside?
Many insulating fire glasses use interlayers that need protecting from UV and moisture, so external positions need a product approved for exterior use, with the right edge seal and glazing system.
Can any fire glass go in any fire-rated frame?
No. A frame is only rated with the glass types and pane sizes it was tested or assessed with. We check the frame's evidence before quoting, and if the existing frame is unknown we say so and price the options.
Marking and records
Most fire glass is permanently marked with its product and classification. We record the marks, pane sizes and evidence references on handover so whoever is responsible for fire safety can show what is installed.
Areas we cover around Rayleigh
Our Essex coverage takes in Rayleigh (SS6, SS7, SS5, SS11) and the neighbouring towns of South Benfleet, Wickford, Pitsea. Rayleigh lies roughly 9 km from Southend-on-Sea, within our Essex coverage.
Fire glass in South BenfleetFire glass in WickfordFire glass in PitseaFire glass in Canvey IslandFire glass in Southend-on-Sea
Fire glazing rules in England
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Building types we cover in Rayleigh
Fire-resistant glass applies to many building types in Rayleigh, including hotels and blocks of flats.
Questions about fire-resistant glass in Rayleigh
What is the difference between E, EW and EI fire glass?
E is integrity only: it stops flames and hot gases passing for the rated time. EW adds a limit on radiated heat through the glass. EI adds insulation, keeping the unexposed face below set temperature rises so people can pass it safely. The number after the letters is the time in minutes.
How thick is fire-resistant glass?
Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.
Do you work on occupied buildings in Rayleigh?
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Do you carry out fire-resistant glass in Rayleigh?
Yes. We survey and install in Rayleigh and across Essex, including the SS6 district and nearby South Benfleet.
Related
Related services in Rayleigh
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
like-for-like
Broken Fire Glass Replacement
Cracked or broken fire glass replaced to the original specification.
Learn more →
E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Process
How a Rayleigh job runs
Start with the brief
Tell us the rating required, sizes and building type, or ask us to find out.
Measure and check
We measure each opening in Rayleigh and check what the existing frames can accept.
Written proposal
We set out the system, glass, evidence and programme, with a fixed price.
Complete and document
Work is completed to the manufacturer's details and documented for your records.