Frameless Fire-Rated Glazing
Butt-jointed fire glass walls with minimal frames.
Learn more →From the E15 district outwards, we arrange fire-rated glass partitions for buildings across Stratford, matching glass, frames and seals to tested evidence rather than guesswork.
Tell us what you need. We reply with next steps and a guide price.
Fire-rated glass partitions are office-style glazed walls that are also tested to resist fire, used where a meeting room, corridor wall or reception wall forms part of a protected route or compartment. They look like standard office partitions but use rated frames, glass and seals throughout.
Rated partitions need fire-stopping inspected before ceilings close. We plan inspection points into the fit-out programme.
Non-rated partitions on the same floor can be matched in profile and finish.
Meeting rooms often need acoustic performance too. Some fire partition systems are tested for both; we confirm the combination.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Our Greater London coverage takes in Stratford (E15, E13, E20, E3, E7, E9) and the neighbouring towns of Bow, Canning Town, Canary Wharf. We cover Stratford as part of our Greater London coverage.
After survey you get a fixed written quote for the agreed scope, so Stratford budgets are not open-ended.
If an existing frame in a Stratford building has no traceable evidence, we say so and price the options rather than guess.
Every quote in Stratford identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Sector guides below cover student accommodation, blocks of flats and other buildings in Stratford.
Some butt-jointed systems are tested for fire. See our frameless fire-rated glazing service for what is possible.
Frames may be slightly deeper and glass slightly thicker, but most systems are hard to tell apart from standard partitions.
Building work in Stratford follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Yes. We survey and install in Stratford and across Greater London, including the E15 district and nearby Bow.
Butt-jointed fire glass walls with minimal frames.
Learn more →Light, modern aluminium framing tested for fire.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Internal glazed screens that keep compartments and corridors protected.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in Stratford and check what the existing frames can accept.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.