Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Kent · CT9

Fire-Rated Glass Floors in Margate, Kent

Fire-rated glass floors in Margate is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.

REI 30 – 60CT9England

Quote for Margate

Tell us what you need. We reply with next steps and a guide price.

What's involved with fire-rated glass floors in Margate

A fire-rated glass floor is a walk-on glazed floor panel, set in a tested support frame, that keeps both its load-bearing capacity and its fire resistance for a stated time. Because a floor carries load, its classification also includes R for load-bearing capacity alongside integrity and insulation.

  • Tested walk-on fire-rated glass floor systems
  • Horizontal fire-rated rooflights
  • Steel support frames to the tested details
  • Handover evidence

Key checks for Margate projects

Load and fire together

A glass floor must carry its design load during the fire period. Only systems tested for both should be used.

Sizes are limited

Tested floor panels have maximum spans. Larger openings are divided by a supporting grid.

Rooflights

Horizontal glazing in a fire-rated roof or floor behaves differently from a wall, so wall glass cannot simply be laid flat.

Where we work around Margate

Survey visits can be arranged anywhere in Margate, including the CT9, CT8, CT10 districts, and in nearby Broadstairs, Ramsgate, Deal. Margate is about 62 km from Maidstone, the largest town in our Kent coverage.

What every Margate quote includes

Rated systems, not just rated glass

Every quote in Margate identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Work around occupied buildings

We can phase work in Margate around residents, staff or pupils, with out-of-hours options.

Evidence you can file

You receive the classification references, glass marks and installation photographs for your fire safety records.

Fire glazing rules in England

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

Building types we cover in Margate

We can survey and quote for schools and colleges, care homes and other building types in Margate.

FAQs for Margate

What does REI mean?

R is load-bearing capacity, E is integrity and I is insulation. A floor needs R because it carries people and loads.

Can we see through it?

Yes, with clear glass and an anti-slip finish, or obscured if privacy is needed.

Do you work on occupied buildings in Margate?

Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.

Which rules apply to fire-rated glazing in Margate?

Building work in Margate follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.

Related

Related services in Margate

E · EW · EI

Fire Glazing Surveys

Surveys that identify what fire glazing you have and what needs fixing.

Learn more →
E 30 – EI 120

Fire-Rated Glazed Screens

Internal glazed screens that keep compartments and corridors protected.

Learn more →
Process

What happens next

Tell us what you have

Send drawings, a fire risk assessment action or photos of the glass marks.

Measure and check

We measure each opening in Margate and check what the existing frames can accept.

Written proposal

We set out the system, glass, evidence and programme, with a fixed price.

Fit and record

We install, photograph seals and fixings before closing up, and hand over the schedule.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote