Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Kent · CT9

Fire-Rated Glazed Screens in Margate, Kent

Our fire-rated glazed screens service covers Margate and neighbouring areas such as Broadstairs and Ramsgate, with every job built around a tested system.

E 30 – EI 120CT9England

Quote for Margate

Tell us what you need. We reply with next steps and a guide price.

What our fire-rated glazed screens service includes in Margate

A fire-rated glazed screen is an internal wall made largely of glass that forms part of a fire-resisting construction, such as a corridor wall, a stair enclosure or a compartment wall. It lets daylight and sightlines through while holding back fire for the period the fire strategy requires.

  • Fire-stopping at head, jambs and sill to the system details
  • Integrated fire doors and glazed doorsets
  • Integrity or insulating glass to the required classification
  • Survey and setting-out against the fire strategy drawings

Key checks for Margate projects

Integrity-only screens on escape routes

Building guidance limits where integrity-only glazing can sit on protected escape routes, and in some positions restricts it to above a set height from the floor. Insulating screens are not restricted in the same way, so the route plan often decides the glass.

Doors inside a screen

A door in a glazed screen has to be tested in that configuration or covered by a doorset certificate and an assessment for the screen. We specify the door and screen as one system rather than mixing products.

What the screen is fixed to matters

Test evidence covers the screen's connection to specific supporting constructions, such as masonry, concrete or a tested partition. Fixing into a lightweight wall that is not covered can undermine the rating, so we check the substrate first.

Which rules apply to fire-rated glazed screens in Margate?

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

Areas we cover around Margate

Whether the building is in central Margate or the wider CT9, CT8, CT10 districts, we can survey and quote. We also cover Broadstairs, Ramsgate, Deal. Maidstone, around 62 km from Margate, is the largest town in the same coverage area.

What every Margate quote includes

Evidence you can file

You receive the classification references, glass marks and installation photographs for your fire safety records.

Fixed written quotes

After survey you get a fixed written quote for the agreed scope, so Margate budgets are not open-ended.

Work around occupied buildings

We can phase work in Margate around residents, staff or pupils, with out-of-hours options.

Sectors we cover in Margate

Sector guides below cover schools and colleges, retail and leisure units and other buildings in Margate.

Questions about fire-rated glazed screens in Margate

How large can a fire-rated glazed screen be?

It depends on the system's evidence. Most systems state maximum pane sizes and overall heights; very tall or wide screens may need an assessment from a test body. We confirm the limits during design.

Can you add a screen to an occupied building?

Yes. We plan dust control, out-of-hours working and temporary protection so the building can stay in use where the fire strategy allows.

Do you work on occupied buildings in Margate?

Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.

How quickly can you survey in Margate?

Survey timing in Margate depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.

Related

Related services in Margate

Process

How a Margate job runs

Tell us what you have

Send drawings, a fire risk assessment action or photos of the glass marks.

Site visit

A survey in Margate confirms sizes, access, existing evidence and fixing conditions.

Written proposal

We set out the system, glass, evidence and programme, with a fixed price.

Complete and document

Work is completed to the manufacturer's details and documented for your records.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote