Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Kent · CT1

Canterbury fire-rated glass floors

Fire-rated glass floors in Canterbury is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.

REI 30 – 60CT1England

Quote for Canterbury

Tell us what you need. We reply with next steps and a guide price.

Fire-Rated Glass Floors in Canterbury: what's included

A fire-rated glass floor is a walk-on glazed floor panel, set in a tested support frame, that keeps both its load-bearing capacity and its fire resistance for a stated time. Because a floor carries load, its classification also includes R for load-bearing capacity alongside integrity and insulation.

  • Steel support frames to the tested details
  • Handover evidence
  • Anti-slip surface treatments within the system
  • Coordination with the structural engineer

Before you order fire-rated glass floors: what matters

Privacy

Obscured or patterned surfaces can be specified within the system for privacy below.

Load and fire together

A glass floor must carry its design load during the fire period. Only systems tested for both should be used.

Sizes are limited

Tested floor panels have maximum spans. Larger openings are divided by a supporting grid.

Canterbury coverage and nearby towns

Coverage around Canterbury includes the CT1, CT2 districts and nearby Whitstable, Herne Bay, Faversham. Maidstone, around 39 km from Canterbury, is the largest town in the same coverage area.

What you can expect in Canterbury

Rated systems, not just rated glass

Every quote in Canterbury identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Honest about unknowns

If an existing frame in a Canterbury building has no traceable evidence, we say so and price the options rather than guess.

Work around occupied buildings

We can phase work in Canterbury around residents, staff or pupils, with out-of-hours options.

Fire glazing rules in England

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

Building types we cover in Canterbury

We can survey and quote for public buildings, industrial units and other building types in Canterbury.

FAQs for Canterbury

Can a glass floor be fire-rated?

Yes, using specialist tested systems that cover load-bearing capacity as well as integrity and insulation.

How big can a fire-rated glass floor panel be?

Each system sets maximum panel sizes; larger areas are divided by a supporting grid.

Do you carry out fire-rated glass floors in Canterbury?

Yes. We survey and install in Canterbury and across Kent, including the CT1 district and nearby Whitstable.

Do you work on occupied buildings in Canterbury?

Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.

Related

Related services in Canterbury

E · EW · EI

Fire Glazing Surveys

Surveys that identify what fire glazing you have and what needs fixing.

Learn more →
E 30 – EI 120

Fire-Rated Glazed Screens

Internal glazed screens that keep compartments and corridors protected.

Learn more →
Process

From enquiry to handover in Canterbury

Start with the brief

Tell us the rating required, sizes and building type, or ask us to find out.

Survey

We visit Canterbury to measure, record existing marks and check the frames and substrate.

Written proposal

We set out the system, glass, evidence and programme, with a fixed price.

Complete and document

Work is completed to the manufacturer's details and documented for your records.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote