Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Greater London · TW9

Fire-Rated Glass Floors across Richmond

Fire-rated glass floors in Richmond is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.

REI 30 – 60TW9England

Quote for Richmond

Tell us what you need. We reply with next steps and a guide price.

What's involved with fire-rated glass floors in Richmond

Fire-rated glass floors and horizontal rooflights are specialist systems with limited sizes and tested frames. We supply and install them where the evidence matches your span, load and rating, and coordinate the structural support with your engineer.

  • Steel support frames to the tested details
  • Horizontal fire-rated rooflights
  • Coordination with the structural engineer
  • Handover evidence

What to check before ordering fire-rated glass floors in Richmond

Sizes are limited

Tested floor panels have maximum spans. Larger openings are divided by a supporting grid.

Rooflights

Horizontal glazing in a fire-rated roof or floor behaves differently from a wall, so wall glass cannot simply be laid flat.

Programme

Glass floors are made to order with longer lead times; we plan early with your contractor.

Richmond coverage and nearby towns

Survey visits can be arranged anywhere in Richmond, including the TW9, TW10, TW1, TW2, TW8, SW14 districts, and in nearby Isleworth, Hounslow, Barnes. Richmond sits within our Greater London coverage, alongside Isleworth.

What you can expect in Richmond

Evidence you can file

You receive the classification references, glass marks and installation photographs for your fire safety records.

Rated systems, not just rated glass

Every quote in Richmond identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Honest about unknowns

If an existing frame in a Richmond building has no traceable evidence, we say so and price the options rather than guess.

Which rules apply to fire-rated glass floors in Richmond?

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

Sectors we cover in Richmond

Sector guides below cover hotels, schools and colleges and other buildings in Richmond.

Fire-Rated Glass Floors: Richmond questions

What does REI mean?

R is load-bearing capacity, E is integrity and I is insulation. A floor needs R because it carries people and loads.

How big can a fire-rated glass floor panel be?

Each system sets maximum panel sizes; larger areas are divided by a supporting grid.

How quickly can you survey in Richmond?

Survey timing in Richmond depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.

Can you price fire-rated glass floors in Richmond from photos?

We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.

Related

Related services in Richmond

E · EW · EI

Fire Glazing Surveys

Surveys that identify what fire glazing you have and what needs fixing.

Learn more →
E 30 – EI 120

Fire-Rated Glazed Screens

Internal glazed screens that keep compartments and corridors protected.

Learn more →
Process

What happens next

Start with the brief

Tell us the rating required, sizes and building type, or ask us to find out.

Measure and check

We measure each opening in Richmond and check what the existing frames can accept.

Quote and evidence

Your quote lists each item with its classification and the evidence it relies on.

Fit and record

We install, photograph seals and fixings before closing up, and hand over the schedule.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote