Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Cheshire · CH1

Fire-Rated Curtain Walling across Chester

From the CH1 district outwards, we arrange fire-rated curtain walling for buildings across Chester, matching glass, frames and seals to tested evidence rather than guesswork.

E 30 – EI 60CH1England

Quote for Chester

Tell us what you need. We reply with next steps and a guide price.

What's involved with fire-rated curtain walling in Chester

Fire-rated curtain walling is a glazed facade system tested to resist fire, used where an external wall has to stop fire spreading to a neighbouring building, between floors, or past a protected stair or lobby. It combines facade performance, such as weather tightness and thermal values, with a fire classification.

  • Tested fire-rated curtain wall systems
  • Spandrel and opaque panel coordination
  • Fire-rated zones within mixed facades
  • Slab-edge fire-stopping and cavity barriers to the design

Where we work around Chester

Coverage around Chester includes the CH1, CH88, CH70 districts and nearby Hawarden, Deeside, Ellesmere Port. Chester is about 31 km from Warrington, the largest town in our Cheshire coverage.

What to check before ordering fire-rated curtain walling in Chester

Combustibility rules

In England, materials in the external walls of relevant buildings 18 metres or more in height are restricted. We coordinate with the facade designer on every component.

External-grade glass

External fire glass must be suitable for UV and weather exposure, usually in a sealed double-glazed unit with the fire pane positioned as tested.

Boundaries

External walls close to a boundary may need to be fire-resisting with limited unprotected areas. Fixed glazing that meets the wall's full fire-resistance requirement, including insulation where required, is not counted as unprotected area, so it can let you keep glass in those positions.

Which rules apply to fire-rated curtain walling in Chester?

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

What every Chester quote includes

Work around occupied buildings

We can phase work in Chester around residents, staff or pupils, with out-of-hours options.

Evidence you can file

You receive the classification references, glass marks and installation photographs for your fire safety records.

Rated systems, not just rated glass

Every quote in Chester identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Chester building types

Sector guides below cover retail and leisure units, schools and colleges and other buildings in Chester.

FAQs for Chester

Can you add fire-rated zones to existing curtain walling?

Sometimes, if the existing system has a tested fire-rated version. Otherwise a local replacement may be needed.

When does curtain walling need to be fire-rated?

Typically where the facade is near a boundary, where it encloses a protected stair or lobby, or where fire spread between floors has to be controlled. The fire strategy sets the requirement.

Can you price fire-rated curtain walling in Chester from photos?

We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.

Which rules apply to fire-rated glazing in Chester?

Building work in Chester follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.

Related

Related services in Chester

E 30 – EI 60

Fire-Rated Windows

Windows near boundaries and protected routes, tested for fire.

Learn more →
E · EW · EI

Fire Glazing Surveys

Surveys that identify what fire glazing you have and what needs fixing.

Learn more →
Process

What happens next

Tell us what you have

Send drawings, a fire risk assessment action or photos of the glass marks.

Measure and check

We measure each opening in Chester and check what the existing frames can accept.

Written proposal

We set out the system, glass, evidence and programme, with a fixed price.

Complete and document

Work is completed to the manufacturer's details and documented for your records.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote