Fire-Rated Windows
Windows near boundaries and protected routes, tested for fire.
Learn more →When a fire strategy, inspection report or building control comment in Hawarden calls for glazing tested to resist fire, our fire-rated curtain walling service covers survey, supply and installation.
Tell us what you need. We reply with next steps and a guide price.
Fire-rated curtain walling is a glazed facade system tested to resist fire, used where an external wall has to stop fire spreading to a neighbouring building, between floors, or past a protected stair or lobby. It combines facade performance, such as weather tightness and thermal values, with a fire classification.
Our Clwyd coverage takes in Hawarden (CH5) and the neighbouring towns of Deeside, Buckley, Chester. Wrexham, around 16 km from Hawarden, is the largest town in the same coverage area.
External fire glass must be suitable for UV and weather exposure, usually in a sealed double-glazed unit with the fire pane positioned as tested.
External walls close to a boundary may need to be fire-resisting with limited unprotected areas. Fixed glazing that meets the wall's full fire-resistance requirement, including insulation where required, is not counted as unprotected area, so it can let you keep glass in those positions.
Fire-rated units can still meet thermal targets when specified correctly; we confirm U-values with the system supplier.
Building regulations are devolved in Wales, so fire safety design follows the Welsh Ministers' version of Approved Document B rather than the English one, alongside impact safety guidance for glazing.
The Regulatory Reform (Fire Safety) Order 2005 applies in Wales, so the responsible person must maintain fire-resisting glazing as part of the premises' fire safety measures. The Fire Safety Act 2021 confirmed this extends to the structure, external walls and flat entrance doors of multi-occupied residential buildings.
Wales is introducing its own building safety regime for occupied residential buildings, so check current Welsh requirements before planning major works to blocks of flats.
After survey you get a fixed written quote for the agreed scope, so Hawarden budgets are not open-ended.
You receive the classification references, glass marks and installation photographs for your fire safety records.
If an existing frame in a Hawarden building has no traceable evidence, we say so and price the options rather than guess.
Sector guides below cover care homes, offices and other buildings in Hawarden.
Sometimes, if the existing system has a tested fire-rated version. Otherwise a local replacement may be needed.
Yes. External fire-rated glazing is usually supplied as a sealed unit with the fire pane in a tested position.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Yes. We survey and install in Hawarden and across Clwyd, including the CH5 district and nearby Deeside.
Windows near boundaries and protected routes, tested for fire.
Learn more →Light, modern aluminium framing tested for fire.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Tell us the rating required, sizes and building type, or ask us to find out.
We measure each opening in Hawarden and check what the existing frames can accept.
We set out the system, glass, evidence and programme, with a fixed price.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.