Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →For Walton-on-Thames buildings, we supply, replace and check fire glass replacement wherever the fire strategy depends on it, working to the tested system rather than the glass alone.
Tell us what you need. We reply with next steps and a guide price.
Broken fire glass replacement is the repair of cracked, shattered or damaged fire-resistant panes with glass of a type the frame's evidence allows, refitted with the correct beads and seals. A cracked fire pane may not perform as tested, so it should be made safe and replaced promptly.
Our Surrey coverage takes in Walton-on-Thames (KT12, TW16, TW17, KT13, KT8, TW12) and the neighbouring towns of Sunbury-on-Thames, Esher, Hampton. Walton-on-Thames lies roughly 13 km from Woking, within our Surrey coverage.
Repeated breakage can point to frame movement, door slamming or impact from trolleys. We look at the cause.
Most fire glass is etched or printed with its product name and classification. A photo of the mark speeds up quoting.
When the original glass is no longer available, the replacement must be covered by the frame's evidence or an assessment.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
We can phase work in Walton-on-Thames around residents, staff or pupils, with out-of-hours options.
Every quote in Walton-on-Thames identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Fire glass replacement applies to many building types in Walton-on-Thames, including industrial units and offices.
Yes. Single panes can be replaced on their own, provided the replacement is compatible with the frame's evidence.
Lead times depend on the glass. Integrity glass is often quick to supply; insulating glass is made to size.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We measure each opening in Walton-on-Thames and check what the existing frames can accept.
We set out the system, glass, evidence and programme, with a fixed price.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.