Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →From the TW16 district outwards, we arrange insulated fire glass for buildings across Sunbury-on-Thames, matching glass, frames and seals to tested evidence rather than guesswork.
Tell us what you need. We reply with next steps and a guide price.
EI glass is the choice where people need to pass close to the glass during a fire, where combustible materials sit near it, or where building guidance would otherwise restrict glazing. We supply and fit EI 30 to EI 120 glass in tested frames, internally and externally.
We cover Sunbury-on-Thames and the surrounding postcode districts, including TW16, TW17, KT12, TW12, KT8, TW15. Nearby towns we also serve include Walton-on-Thames, Hampton, Hanworth. Sunbury-on-Thames lies roughly 14 km from Woking, within our Surrey coverage.
Modern EI glass is clear in normal use, with high light transmission at lower ratings.
Insulating fire glass should be stored dry, upright and away from direct sun before fitting.
When heated, the interlayers turn opaque and expand, forming an insulating shield. After a fire the glass will need replacing.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
If an existing frame in a Sunbury-on-Thames building has no traceable evidence, we say so and price the options rather than guess.
After survey you get a fixed written quote for the agreed scope, so Sunbury-on-Thames budgets are not open-ended.
Every quote in Sunbury-on-Thames identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Sector guides below cover public buildings, retail and leisure units and other buildings in Sunbury-on-Thames.
Yes, in normal conditions. It turns opaque only when heated in a fire.
Only products approved for external use, usually in a sealed unit with UV protection.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Butt-jointed fire glass walls with minimal frames.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We visit Sunbury-on-Thames to measure, record existing marks and check the frames and substrate.
We set out the system, glass, evidence and programme, with a fixed price.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.