Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Fire glass replacement in Greenwich is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Broken fire glass replacement is the repair of cracked, shattered or damaged fire-resistant panes with glass of a type the frame's evidence allows, refitted with the correct beads and seals. A cracked fire pane may not perform as tested, so it should be made safe and replaced promptly.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Every quote in Greenwich identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in Greenwich around residents, staff or pupils, with out-of-hours options.
When the original glass is no longer available, the replacement must be covered by the frame's evidence or an assessment.
A broken pane can be a cut hazard and a gap in compartmentation. We can make it safe on the first visit while the replacement is cut.
Whoever is responsible for fire safety may need temporary measures until the new pane is fitted; we can advise on practical options.
Coverage around Greenwich includes the SE10, SE8, SE14, SE13, SE3, SE4 districts and nearby Blackheath, Canary Wharf, Catford. Greenwich sits within our Greater London coverage, alongside Blackheath.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Fire glass replacement applies to many building types in Greenwich, including student accommodation and hotels.
Lead times depend on the glass. Integrity glass is often quick to supply; insulating glass is made to size.
Yes. Single panes can be replaced on their own, provided the replacement is compatible with the frame's evidence.
Yes. We survey and install in Greenwich and across Greater London, including the SE10 district and nearby Blackheath.
Building work in Greenwich follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
A survey in Greenwich confirms sizes, access, existing evidence and fixing conditions.
Your quote lists each item with its classification and the evidence it relies on.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.