Fire Door Vision Panels
Replacement and new vision panels fitted to the door's evidence.
Learn more →Wired glass replacement in Warwick is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Wired glass replacement means removing old Georgian or polished wired glass from doors, screens and panels and fitting modern fire-resistant glass that keeps the fire rating while meeting today's impact safety expectations. Wired glass holds together in a fire because of the mesh, but plain wired glass usually lacks an impact safety classification and can cause serious injuries when broken by impact.
Wired glass generally provides integrity only. Replacing it lets you keep or improve the fire performance while adding impact safety.
Modern fire glass is clear, so replacements also improve visibility and appearance.
Wired glass breaks into sharp pieces held by wire, and the wire weakens the glass. In doors and low-level panels it is a common source of hand and arm injuries.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Our Warwickshire coverage takes in Warwick (CV34, CV31, CV32) and the neighbouring towns of Royal Leamington Spa, Kenilworth, Stratford-upon-Avon. Warwick lies roughly 28 km from Nuneaton, within our Warwickshire coverage.
After survey you get a fixed written quote for the agreed scope, so Warwick budgets are not open-ended.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Every quote in Warwick identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can survey and quote for blocks of flats, industrial units and other building types in Warwick.
Clear modern integrity or insulating fire glass with an impact classification, compatible with the frame.
When broken by impact it can cause serious cuts. That is why it is often replaced in doors and low-level positions.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Replacement and new vision panels fitted to the door's evidence.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
A survey in Warwick confirms sizes, access, existing evidence and fixing conditions.
Your quote lists each item with its classification and the evidence it relies on.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.