Fire Door Vision Panels
Replacement and new vision panels fitted to the door's evidence.
Learn more →For Cambridge buildings, we supply, replace and check wired glass replacement wherever the fire strategy depends on it, working to the tested system rather than the glass alone.
Tell us what you need. We reply with next steps and a guide price.
Wired glass replacement means removing old Georgian or polished wired glass from doors, screens and panels and fitting modern fire-resistant glass that keeps the fire rating while meeting today's impact safety expectations. Wired glass holds together in a fire because of the mesh, but plain wired glass usually lacks an impact safety classification and can cause serious injuries when broken by impact.
We can replace wired glass over holidays, weekends or zone by zone to keep the building running.
Wired glass breaks into sharp pieces held by wire, and the wire weakens the glass. In doors and low-level panels it is a common source of hand and arm injuries.
Modern fire glass is clear, so replacements also improve visibility and appearance.
Our Cambridgeshire coverage takes in Cambridge (CB21, CB2, CB3, CB1, CB4, CB5) and the neighbouring towns of Newmarket, Ely, Huntingdon. Cambridge lies roughly 48 km from Peterborough, within our Cambridgeshire coverage.
You receive the classification references, glass marks and installation photographs for your fire safety records.
Every quote in Cambridge identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in Cambridge around residents, staff or pupils, with out-of-hours options.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
We can survey and quote for industrial units, healthcare buildings and other building types in Cambridge.
When broken by impact it can cause serious cuts. That is why it is often replaced in doors and low-level positions.
It can provide integrity in the right frame, typically for 30 minutes and sometimes longer in tested systems, but it does not insulate, and plain wired glass usually lacks an impact safety classification.
Building work in Cambridge follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Survey timing in Cambridge depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Replacement and new vision panels fitted to the door's evidence.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We visit Cambridge to measure, record existing marks and check the frames and substrate.
We set out the system, glass, evidence and programme, with a fixed price.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.