Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Shropshire · TF3

Insulated Fire Glass (EI) across Telford

Insulated fire glass in Telford is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.

EI 30 – EI 120TF3England

Quote for Telford

Tell us what you need. We reply with next steps and a guide price.

What's involved with insulated fire glass in Telford

EI glass is the choice where people need to pass close to the glass during a fire, where combustible materials sit near it, or where building guidance would otherwise restrict glazing. We supply and fit EI 30 to EI 120 glass in tested frames, internally and externally.

  • EI 30, EI 60, EI 90 and EI 120 glass
  • Internal and external-grade build-ups
  • Insulating glass in sealed double-glazed units
  • Impact-classified insulating glass

Before you order insulated fire glass: what matters

How it works

When heated, the interlayers turn opaque and expand, forming an insulating shield. After a fire the glass will need replacing.

Storage on site

Insulating fire glass should be stored dry, upright and away from direct sun before fitting.

The temperature rule

EI testing limits the average temperature rise on the unexposed face to 140°C and any single point to 180°C, which is why people can pass it.

Where we work around Telford

Whether the building is in central Telford or the wider TF3, TF4, TF2, TF1, TF7 districts, we can survey and quote. We also cover Wellington, Shrewsbury, Wolverhampton. Telford is the main town we cover in Shropshire.

What you can expect in Telford

Work around occupied buildings

We can phase work in Telford around residents, staff or pupils, with out-of-hours options.

Evidence you can file

You receive the classification references, glass marks and installation photographs for your fire safety records.

Rated systems, not just rated glass

Every quote in Telford identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Which rules apply to insulated fire glass in Telford?

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

Sectors we cover in Telford

Sector guides below cover offices, schools and colleges and other buildings in Telford.

FAQs for Telford

Can EI glass be used outside?

Only products approved for external use, usually in a sealed unit with UV protection.

Why is insulated fire glass so much more expensive?

It is a multi-layer product with specialist interlayers, and the frame and installation must suit its weight.

Do you work on occupied buildings in Telford?

Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.

Which rules apply to fire-rated glazing in Telford?

Building work in Telford follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.

Related

Related services in Telford

E 30 – EI 120

Fire-Resistant Glass

Integrity and insulating fire glass supplied and fitted into tested frames.

Learn more →
Process

From enquiry to handover in Telford

Start with the brief

Tell us the rating required, sizes and building type, or ask us to find out.

Site visit

A survey in Telford confirms sizes, access, existing evidence and fixing conditions.

Written quote

You receive a written quote naming the tested system and classification.

Complete and document

Work is completed to the manufacturer's details and documented for your records.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote