E 30 – EI 120
Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →
Essex · CO1
Insulated Fire Glass (EI) in Colchester, Essex
When a fire strategy, inspection report or building control comment in Colchester calls for glazing tested to resist fire, our insulated fire glass service covers survey, supply and installation.
EI 30 – EI 120CO1England
Quote for Colchester
Tell us what you need. We reply with next steps and a guide price.
What's involved with insulated fire glass in Colchester
EI glass is the choice where people need to pass close to the glass during a fire, where combustible materials sit near it, or where building guidance would otherwise restrict glazing. We supply and fit EI 30 to EI 120 glass in tested frames, internally and externally.
- Insulating glass in sealed double-glazed units
- EI 30, EI 60, EI 90 and EI 120 glass
- Matched glazing systems and seals
- Impact-classified insulating glass
What to check before ordering insulated fire glass in Colchester
Storage on site
Insulating fire glass should be stored dry, upright and away from direct sun before fitting.
Optical quality
Modern EI glass is clear in normal use, with high light transmission at lower ratings.
Exterior positions
Some EI products are internal only. External use needs a product and edge seal approved for UV and weather.
Areas we cover around Colchester
Whether the building is in central Colchester or the wider CO1, CO3, CO4, CO2 districts, we can survey and quote. We also cover Sudbury, Clacton-on-Sea, Witham. Colchester is about 41 km from Southend-on-Sea, the largest town in our Essex coverage.
EI glass in SudburyEI glass in Clacton-on-SeaEI glass in WithamEI glass in MaldonEI glass in Braintree
How we work in Colchester
Work around occupied buildings
We can phase work in Colchester around residents, staff or pupils, with out-of-hours options.
Honest about unknowns
If an existing frame in a Colchester building has no traceable evidence, we say so and price the options rather than guess.
England rules applied
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Which rules apply to insulated fire glass in Colchester?
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Sectors we cover in Colchester
Insulated fire glass applies to many building types in Colchester, including retail and leisure units and public buildings.
Insulated Fire Glass (EI): Colchester questions
Can EI glass be used outside?
Only products approved for external use, usually in a sealed unit with UV protection.
Is EI glass clear?
Yes, in normal conditions. It turns opaque only when heated in a fire.
Do you work on occupied buildings in Colchester?
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Which rules apply to fire-rated glazing in Colchester?
Building work in Colchester follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Related
Related services in Colchester
E · EW
Integrity Fire Glass (E & EW)
E and EW glass where flames and hot gases must be stopped.
Learn more →
E 30 – EI 60
Stair, Lobby & Corridor Glazing
Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →
E 30 – EI 60
Frameless Fire-Rated Glazing
Butt-jointed fire glass walls with minimal frames.
Learn more →Process
From enquiry to handover in Colchester
Start with the brief
Tell us the rating required, sizes and building type, or ask us to find out.
Measure and check
We measure each opening in Colchester and check what the existing frames can accept.
Written proposal
We set out the system, glass, evidence and programme, with a fixed price.
Complete and document
Work is completed to the manufacturer's details and documented for your records.