Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →We provide insulated fire glass in Bearsden and across Dunbartonshire, working from the classification your building needs and handing over the evidence that proves what was fitted.
Tell us what you need. We reply with next steps and a guide price.
EI glass is the choice where people need to pass close to the glass during a fire, where combustible materials sit near it, or where building guidance would otherwise restrict glazing. We supply and fit EI 30 to EI 120 glass in tested frames, internally and externally.
When heated, the interlayers turn opaque and expand, forming an insulating shield. After a fire the glass will need replacing.
Modern EI glass is clear in normal use, with high light transmission at lower ratings.
EI testing limits the average temperature rise on the unexposed face to 140°C and any single point to 180°C, which is why people can pass it.
Whether the building is in central Bearsden or the wider G61, G15, G13, G62, G23, G20 districts, we can survey and quote. We also cover Clydebank, Renfrew, Bishopbriggs. Bearsden is the largest town in our Dunbartonshire coverage.
You receive the classification references, glass marks and installation photographs for your fire safety records.
If an existing frame in a Bearsden building has no traceable evidence, we say so and price the options rather than guess.
Designs follow the building and fire safety rules that apply in Scotland, not a one-size-fits-all approach.
In Scotland, building work needs a building warrant under the Building (Scotland) Regulations 2004, with fire guidance in Section 2 of the Building Standards Technical Handbooks rather than Approved Documents.
For relevant premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on the duty holder to maintain fire safety measures, which include fire-resisting glazing.
Insulated fire glass applies to many building types in Bearsden, including hotels and blocks of flats.
It is a multi-layer product with specialist interlayers, and the frame and installation must suit its weight.
Only products approved for external use, usually in a sealed unit with UV protection.
Bearsden is in Scotland, so work needs a building warrant and follows the Building Standards Technical Handbooks, with the Fire (Scotland) Act 2005 covering occupied premises.
Survey timing in Bearsden depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Butt-jointed fire glass walls with minimal frames.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We measure each opening in Bearsden and check what the existing frames can accept.
We set out the system, glass, evidence and programme, with a fixed price.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.