Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Looking for insulated fire glass in High Wycombe? We survey, supply and install tested fire-rated glazing for healthcare buildings, blocks of flats and other buildings in and around High Wycombe, including the HP13 postcode district.
Tell us what you need. We reply with next steps and a guide price.
EI glass is the choice where people need to pass close to the glass during a fire, where combustible materials sit near it, or where building guidance would otherwise restrict glazing. We supply and fit EI 30 to EI 120 glass in tested frames, internally and externally.
Coverage around High Wycombe includes the HP13, HP11, HP12, HP15 districts and nearby Amersham, Maidenhead, Chesham. Milton Keynes, around 46 km from High Wycombe, is the largest town in the same coverage area.
EI testing limits the average temperature rise on the unexposed face to 140°C and any single point to 180°C, which is why people can pass it.
Insulating fire glass should be stored dry, upright and away from direct sun before fitting.
Modern EI glass is clear in normal use, with high light transmission at lower ratings.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
We can phase work in High Wycombe around residents, staff or pupils, with out-of-hours options.
After survey you get a fixed written quote for the agreed scope, so High Wycombe budgets are not open-ended.
Insulated fire glass applies to many building types in High Wycombe, including healthcare buildings and blocks of flats.
It is a multi-layer product with specialist interlayers, and the frame and installation must suit its weight.
Yes, in normal conditions. It turns opaque only when heated in a fire.
Yes. We survey and install in High Wycombe and across Buckinghamshire, including the HP13 district and nearby Amersham.
Survey timing in High Wycombe depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →E and EW glass where flames and hot gases must be stopped.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Butt-jointed fire glass walls with minimal frames.
Learn more →Tell us the rating required, sizes and building type, or ask us to find out.
A survey in High Wycombe confirms sizes, access, existing evidence and fixing conditions.
We set out the system, glass, evidence and programme, with a fixed price.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.