England · 1 postcode district
Fire-Resistant Glass across Rutland
We take fire-resistant glass enquiries from across Rutland, with surveys arranged in Oakham, Uppingham and the surrounding towns.
E 30 – EI 120EnglandLE
Quote for Rutland
Tell us what you need. We reply with next steps and a guide price.
Fire-Resistant Glass: what you get in Rutland
Fire-resistant glass is glazing that has been tested, as part of a complete glazed system, to hold back fire for a set time. It is classified by what it stops: E (integrity) keeps flames and hot gases on the fire side, EW also limits the heat radiated through the glass, and EI (integrity and insulation) also limits the temperature rise on the protected side, so people can pass it more safely.
- Integrity (E) glass: modified toughened, glass-ceramic and polished wired types
- Impact-classified build-ups for critical locations
- Intumescent glazing seals, tapes and gaskets to the tested specification
Before you order in Rutland
Which classification do you actually need?
The fire strategy or building control drawings set the rating for each element. Integrity-only glass is cheaper and thinner, but its use on escape routes is restricted; insulating glass carries far fewer restrictions because people can pass it safely during a fire.
Marking and records
Most fire glass is permanently marked with its product and classification. We record the marks, pane sizes and evidence references on handover so whoever is responsible for fire safety can show what is installed.
Impact safety still applies
Glass in doors, side panels and low-level positions has to meet impact safety rules as well as the fire rating. Most modern fire glass carries an impact classification; old wired glass usually does not.
Regulations for Rutland projects
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Places we cover in Rutland
Across Rutland we can survey in Oakham, Uppingham and every district in the LE postcode areas.
Questions from Rutland clients
How thick is fire-resistant glass?
Integrity glass can be similar in thickness to standard glass. Insulating glass is laminated from several layers, so it gets markedly thicker and heavier as the rating increases from EI 30 to EI 120.
Is toughened glass fire-resistant?
Ordinary toughened safety glass is not. It can shatter early in a fire. Fire-resistant integrity glass is specially processed or formulated and only gains a rating when fitted in a tested frame and glazing system.
What is the difference between E, EW and EI fire glass?
E is integrity only: it stops flames and hot gases passing for the rated time. EW adds a limit on radiated heat through the glass. EI adds insulation, keeping the unexposed face below set temperature rises so people can pass it safely. The number after the letters is the time in minutes.
Do you cover all of Rutland?
Yes. We take enquiries from across Rutland, including Oakham and Uppingham, and arrange surveys to suit your programme.
Related
Related services in Rutland
Process
What happens next
Tell us what you have
Send drawings, a fire risk assessment action or photos of the glass marks.
Site visit
A survey in Rutland confirms sizes, access, existing evidence and fixing conditions.
Written proposal
We set out the system, glass, evidence and programme, with a fixed price.
Install and hand over
Installation to the system details, then a handover pack with photographs and evidence.