Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →We provide fire glass replacement in Pitsea and across Essex, working from the classification your building needs and handing over the evidence that proves what was fitted.
Tell us what you need. We reply with next steps and a guide price.
We identify the existing glass from its marks, measure the opening, make the area safe and fit the correct replacement. If the original product is no longer made, we source an alternative covered by the frame's evidence or advise on the right next step.
If an existing frame in a Pitsea building has no traceable evidence, we say so and price the options rather than guess.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
Every quote in Pitsea identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
When the original glass is no longer available, the replacement must be covered by the frame's evidence or an assessment.
A broken pane can be a cut hazard and a gap in compartmentation. We can make it safe on the first visit while the replacement is cut.
Whoever is responsible for fire safety may need temporary measures until the new pane is fitted; we can advise on practical options.
We cover Pitsea and the surrounding postcode districts, including SS13, SS14, SS16, SS12. Nearby towns we also serve include Basildon, South Benfleet, Wickford. Pitsea lies roughly 15 km from Southend-on-Sea, within our Essex coverage.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Fire glass replacement applies to many building types in Pitsea, including care homes and industrial units.
It may not perform as tested. Treat it as a defect and arrange replacement promptly.
Look for an etched or printed mark in a corner of the pane. Send us a photo with the approximate size.
Building work in Pitsea follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in Pitsea and check what the existing frames can accept.
We set out the system, glass, evidence and programme, with a fixed price.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.