Fanlights, Side Panels & Borrowed Lights
Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →From the CR4 district outwards, we arrange timber fire-rated screens for buildings across Mitcham, matching glass, frames and seals to tested evidence rather than guesswork.
Tell us what you need. We reply with next steps and a guide price.
The rating depends on the timber species and density, frame sections, bead profiles, fixings and the glazing seals used in the test. We build timber screens to a tested specification, or to a formal assessment, and finish them without compromising the intumescent details.
Heavier insulating glass may need larger sections; we confirm the frame can carry the chosen build-up.
Paint and stain are fine on the timber, but intumescent seals must stay clear of paint. We mask them during finishing.
Bead profile, height and fixing type and spacing are all taken from the test. Short-cutting the fixings is a common reason screens fail inspection.
Whether the building is in central Mitcham or the wider CR4, SM4, SW19, SW17, SW16, SM5 districts, we can survey and quote. We also cover Morden, Wimbledon, Streatham. Mitcham is one of the Greater London districts we cover.
After survey you get a fixed written quote for the agreed scope, so Mitcham budgets are not open-ended.
We can phase work in Mitcham around residents, staff or pupils, with out-of-hours options.
If an existing frame in a Mitcham building has no traceable evidence, we say so and price the options rather than guess.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Timber fire-rated screens applies to many building types in Mitcham, including retail and leisure units and hotels.
Yes. The timber can be painted, stained or lacquered. Intumescent seals are kept clear of paint.
Dense hardwoods are typical; the exact species depends on the tested specification. We confirm species and density on the drawings.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Glazed over-panels, side lights and borrowed lights around fire doors.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Internal glazed screens that keep compartments and corridors protected.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We measure each opening in Mitcham and check what the existing frames can accept.
You receive a written quote naming the tested system and classification.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.