Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Greater London · SW2

Timber Fire-Rated Screens in Brixton

Our timber fire-rated screens service covers Brixton and neighbouring areas such as Peckham and Pimlico, with every job built around a tested system.

E 30 – EI 60SW2England

Quote for Brixton

Tell us what you need. We reply with next steps and a guide price.

Timber Fire-Rated Screens in Brixton: what's included

The rating depends on the timber species and density, frame sections, bead profiles, fixings and the glazing seals used in the test. We build timber screens to a tested specification, or to a formal assessment, and finish them without compromising the intumescent details.

  • Fire-stopping to the structure
  • Painted, stained or lacquered finishes
  • Hardwood frames to tested sections and densities
  • Fire-rated timber doorsets set into screens

Before you order timber fire-rated screens: what matters

Moisture and movement

Timber frames need dry conditions on site and acclimatisation before glazing to avoid movement around the glass.

Heritage buildings

Timber suits listed and older buildings, and existing screens can sometimes be upgraded with new glass and seals, subject to an assessment of the frame.

Finishing

Paint and stain are fine on the timber, but intumescent seals must stay clear of paint. We mask them during finishing.

Areas we cover around Brixton

Coverage around Brixton includes the SW2, SW9, SE24, SE5, SW4, SE17 districts and nearby Peckham, Pimlico, Battersea. Brixton is one of the Greater London districts we cover.

What you can expect in Brixton

Rated systems, not just rated glass

Every quote in Brixton identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

England rules applied

Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.

Honest about unknowns

If an existing frame in a Brixton building has no traceable evidence, we say so and price the options rather than guess.

Which rules apply to timber fire-rated screens in Brixton?

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

Sectors we cover in Brixton

We can survey and quote for schools and colleges, offices and other building types in Brixton.

Questions about timber fire-rated screens in Brixton

Can you upgrade an old timber screen?

Sometimes. If the frame can be shown to be suitable, we can replace non-rated glass and add the correct seals and beads. Where it cannot, replacement is the honest answer.

Can timber screens be fire-rated?

Yes. Hardwood screens are tested to 30 and 60 minutes in many configurations, with the right glass, beads and seals.

Can you price timber fire-rated screens in Brixton from photos?

We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.

Which rules apply to fire-rated glazing in Brixton?

Building work in Brixton follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.

Related

Related services in Brixton

E 30 – EI 120

Fire-Rated Glazed Screens

Internal glazed screens that keep compartments and corridors protected.

Learn more →
to door rating

Fire Door Vision Panels

Replacement and new vision panels fitted to the door's evidence.

Learn more →
Process

What happens next

Tell us what you have

Send drawings, a fire risk assessment action or photos of the glass marks.

Measure and check

We measure each opening in Brixton and check what the existing frames can accept.

Written quote

You receive a written quote naming the tested system and classification.

Fit and record

We install, photograph seals and fixings before closing up, and hand over the schedule.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote