Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Essex · CM1

Chelmsford timber fire-rated screens

For Chelmsford buildings, we supply, replace and check timber fire-rated screens wherever the fire strategy depends on it, working to the tested system rather than the glass alone.

E 30 – EI 60CM1England

Quote for Chelmsford

Tell us what you need. We reply with next steps and a guide price.

What our timber fire-rated screens service includes in Chelmsford

The rating depends on the timber species and density, frame sections, bead profiles, fixings and the glazing seals used in the test. We build timber screens to a tested specification, or to a formal assessment, and finish them without compromising the intumescent details.

  • Fire-stopping to the structure
  • Fire-rated timber doorsets set into screens
  • Painted, stained or lacquered finishes
  • Hardwood frames to tested sections and densities

Areas we cover around Chelmsford

Whether the building is in central Chelmsford or the wider CM1, CM2 districts, we can survey and quote. We also cover Billericay, Witham, Maldon. Southend-on-Sea, around 28 km from Chelmsford, is the largest town in the same coverage area.

What to check before ordering timber fire-rated screens in Chelmsford

Moisture and movement

Timber frames need dry conditions on site and acclimatisation before glazing to avoid movement around the glass.

Finishing

Paint and stain are fine on the timber, but intumescent seals must stay clear of paint. We mask them during finishing.

Insulating glass weight

Heavier insulating glass may need larger sections; we confirm the frame can carry the chosen build-up.

England regulations that shape the job

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.

What you can expect in Chelmsford

Work around occupied buildings

We can phase work in Chelmsford around residents, staff or pupils, with out-of-hours options.

England rules applied

Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.

Rated systems, not just rated glass

Every quote in Chelmsford identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.

Sectors we cover in Chelmsford

Sector guides below cover blocks of flats, offices and other buildings in Chelmsford.

FAQs for Chelmsford

Can timber screens be fire-rated?

Yes. Hardwood screens are tested to 30 and 60 minutes in many configurations, with the right glass, beads and seals.

Can you upgrade an old timber screen?

Sometimes. If the frame can be shown to be suitable, we can replace non-rated glass and add the correct seals and beads. Where it cannot, replacement is the honest answer.

Do you work on occupied buildings in Chelmsford?

Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.

Which rules apply to fire-rated glazing in Chelmsford?

Building work in Chelmsford follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.

Related

Related services in Chelmsford

E 30 – EI 120

Fire-Rated Glazed Screens

Internal glazed screens that keep compartments and corridors protected.

Learn more →
to door rating

Fire Door Vision Panels

Replacement and new vision panels fitted to the door's evidence.

Learn more →
Process

How a Chelmsford job runs

Tell us what you have

Send drawings, a fire risk assessment action or photos of the glass marks.

Measure and check

We measure each opening in Chelmsford and check what the existing frames can accept.

Quote and evidence

Your quote lists each item with its classification and the evidence it relies on.

Complete and document

Work is completed to the manufacturer's details and documented for your records.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote