Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →We provide steel fire-rated screens in Wallsend and across Tyne and Wear, working from the classification your building needs and handing over the evidence that proves what was fitted.
Tell us what you need. We reply with next steps and a guide price.
Steel fire-rated screens use steel frame sections to hold fire-resistant glass, and they are the usual choice when a project needs slim sightlines with a high rating, large panes or heavy insulating glass. Steel keeps its strength well in fire and can carry the weight of thick EI glass over long spans.
Paint and powder coat are normally covered by the evidence, but intumescent strips and seals must not be painted over. We protect them during finishing.
Steel profiles stay slim at higher ratings and carry heavy glass without bulky frames, which suits stair cores, lobbies and offices where light matters.
Steel screens with insulating glass are heavy. Fixings are taken from the system details and the substrate is checked to carry the load.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Survey visits can be arranged anywhere in Wallsend, including the NE28, NE31, NE6, NE32, NE7, NE2 districts, and in nearby Hebburn, Jarrow, Felling. Newcastle upon Tyne, around 5 km from Wallsend, is the largest town in the same coverage area.
Every quote in Wallsend identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
After survey you get a fixed written quote for the agreed scope, so Wallsend budgets are not open-ended.
We can phase work in Wallsend around residents, staff or pupils, with out-of-hours options.
Sector guides below cover schools and colleges, blocks of flats and other buildings in Wallsend.
Often slightly, especially at higher ratings, but steel can be the more economical route when panes are large or the rating is EI 60 and above.
Some steel systems with that look are tested for fire, many decorative ones are not. Ask for the classification and test evidence; we only quote tested systems for fire-rated positions.
Building work in Wallsend follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Yes. We survey and install in Wallsend and across Tyne and Wear, including the NE28 district and nearby Hebburn.
Internal glazed screens that keep compartments and corridors protected.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Glazed screens and doors on protected stairs, lobbies and corridors.
Learn more →Light, modern aluminium framing tested for fire.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We measure each opening in Wallsend and check what the existing frames can accept.
Your quote lists each item with its classification and the evidence it relies on.
Work is completed to the manufacturer's details and documented for your records.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.