Tested fire-rated glazing systemsSurvey, supply and install UK-wideEvidence pack on handover
0800 088 6248
FIRE-GLAZING
Kent · ME1

Fire-Rated Glazed Screens across Rochester

If a building in Rochester needs fire-rated glazed screens, the starting point is the rating its fire strategy requires. We confirm that, survey the openings and quote a tested system to suit.

E 30 – EI 120ME1England

Quote for Rochester

Tell us what you need. We reply with next steps and a guide price.

What our fire-rated glazed screens service includes in Rochester

We design, supply and install fire-rated screens in steel, aluminium, timber and frameless formats, working from the rating and positions on your fire strategy. Every screen is built within the limits of its test or assessment evidence: pane sizes, transom and mullion spacing, glass type and the way it is fixed to the surrounding structure.

  • Steel, aluminium, timber or frameless frame systems
  • Handover evidence pack
  • Integrated fire doors and glazed doorsets
  • Fire-stopping at head, jambs and sill to the system details

Where we work around Rochester

Whether the building is in central Rochester or the wider ME1, ME4, ME2, ME7, ME5 districts, we can survey and quote. We also cover Chatham, Strood, Gillingham. Maidstone, around 13 km from Rochester, is the largest town in the same coverage area.

What to check before ordering fire-rated glazed screens in Rochester

What the screen is fixed to matters

Test evidence covers the screen's connection to specific supporting constructions, such as masonry, concrete or a tested partition. Fixing into a lightweight wall that is not covered can undermine the rating, so we check the substrate first.

Building control

New screens, and changes to existing fire-resisting walls, are normally building work. We provide the product evidence your building control body or approved inspector will ask for.

Doors inside a screen

A door in a glazed screen has to be tested in that configuration or covered by a doorset certificate and an assessment for the screen. We specify the door and screen as one system rather than mixing products.

Fire glazing rules in England

England Which rules apply?

Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.

Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.

What you can expect in Rochester

England rules applied

Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.

Evidence you can file

You receive the classification references, glass marks and installation photographs for your fire safety records.

Work around occupied buildings

We can phase work in Rochester around residents, staff or pupils, with out-of-hours options.

Sectors we cover in Rochester

Fire-rated glazed screens applies to many building types in Rochester, including schools and colleges and retail and leisure units.

Questions about fire-rated glazed screens in Rochester

How large can a fire-rated glazed screen be?

It depends on the system's evidence. Most systems state maximum pane sizes and overall heights; very tall or wide screens may need an assessment from a test body. We confirm the limits during design.

Can a fire-rated screen be fully glazed?

Yes. Many screens are glazed from floor to ceiling, subject to the classification needed on that route and any impact safety requirements at low level.

How quickly can you survey in Rochester?

Survey timing in Rochester depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.

Do you work on occupied buildings in Rochester?

Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.

Related

Related services in Rochester

Process

What happens next

Start with the brief

Tell us the rating required, sizes and building type, or ask us to find out.

Survey

We visit Rochester to measure, record existing marks and check the frames and substrate.

Written proposal

We set out the system, glass, evidence and programme, with a fixed price.

Install and hand over

Installation to the system details, then a handover pack with photographs and evidence.

Need fire-rated glazing checked, replaced or installed?

Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.

Call freeGet a quote