E 30 – EI 120
Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →
Kent · ME1
Rochester fire-rated escape route glazing
Looking for fire-rated escape route glazing in Rochester? We survey, supply and install tested fire-rated glazing for public buildings, hotels and other buildings in and around Rochester, including the ME1 postcode district.
E 30 – EI 60ME1England
Quote for Rochester
Tell us what you need. We reply with next steps and a guide price.
What's involved with fire-rated escape route glazing in Rochester
Escape route glazing is fire-rated glass in the walls and doors of protected stairs, lobbies and corridors, the routes people rely on to leave a building safely. It has to hold back fire and smoke for the rated time, and on many routes it has to keep heat away from people passing it as well.
- Insulating glass where escape routes require it
- Stair enclosure screens
- Corridor subdivision doors with vision panels
- Lobby and corridor screens with doors
Rochester coverage and nearby towns
We cover Rochester and the surrounding postcode districts, including ME1, ME4, ME2, ME7, ME5. Nearby towns we also serve include Chatham, Strood, Gillingham. Rochester is about 13 km from Maidstone, the largest town in our Kent coverage.
Escape routes in ChathamEscape routes in StroodEscape routes in GillinghamEscape routes in GravesendEscape routes in Maidstone
Before you order fire-rated escape route glazing: what matters
Stair enclosures
Glazing into a protected stair needs particular care; the rules depend on whether the stair is part of a protected shaft and how the building is used.
Integrity versus insulation
Building guidance limits the amount and position of integrity-only glass on protected routes because people may need to pass close to it while fire is on the other side. Insulating glass removes most of those limits.
Vision through doors
Corridor subdivision doors and double-swing doors normally need vision panels so people do not collide.
Which rules apply to fire-rated escape route glazing in Rochester?
England Which rules apply?
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
What you can expect in Rochester
Rated systems, not just rated glass
Every quote in Rochester identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Honest about unknowns
If an existing frame in a Rochester building has no traceable evidence, we say so and price the options rather than guess.
Evidence you can file
You receive the classification references, glass marks and installation photographs for your fire safety records.
Sectors we cover in Rochester
Sector guides below cover public buildings, hotels and other buildings in Rochester.
FAQs for Rochester
Can I use glass on a fire escape route?
Yes, if it is fire-rated to the required classification and, for integrity-only glass, within the limits building guidance sets for that position.
Can work be done while the building is occupied?
Yes, with phasing and temporary arrangements agreed with whoever is responsible for fire safety in the building.
Which rules apply to fire-rated glazing in Rochester?
Building work in Rochester follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
How quickly can you survey in Rochester?
Survey timing in Rochester depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Related
Related services in Rochester
FD30 / FD60
Fire-Rated Glazed Doors
Doorsets with large glazed panels, tested as complete units.
Learn more →
EI 30 – EI 120
Insulated Fire Glass (EI)
EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →
E · EW · EI
Fire Glazing Surveys
Surveys that identify what fire glazing you have and what needs fixing.
Learn more →Process
How a Rochester job runs
Start with the brief
Tell us the rating required, sizes and building type, or ask us to find out.
Measure and check
We measure each opening in Rochester and check what the existing frames can accept.
Quote and evidence
Your quote lists each item with its classification and the evidence it relies on.
Fit and record
We install, photograph seals and fixings before closing up, and hand over the schedule.