Wales · 20 postcode districts
Frameless Fire-Rated Glazing in Mid Glamorgan
Our Mid Glamorgan frameless fire-rated glazing service covers survey, supply and installation to the tested details, documented on handover.
E 30 – EI 60WalesCF
Quote for Mid Glamorgan
Tell us what you need. We reply with next steps and a guide price.
Frameless Fire-Rated Glazing: what you get in Mid Glamorgan
Frameless fire glazing only works within tight, tested limits: specific glass types, joint widths, sealants, channel details and maximum heights. We specify it where the evidence supports your layout, and tell you plainly when a slim framed system is the better route.
- Rated sealant joints
- Handover evidence
- Frameless-look fire doors where tested
What to check before ordering in Mid Glamorgan
Doors
True frameless fire doors are rare; most frameless walls use a slim framed door within the run. We show you the options on drawings.
Protection on site
Frameless glass is exposed during the build. We plan protection until other trades finish.
Cost
Frameless fire glazing is at the top of the price range because of the glass and precision required.
Wales rules for fire glazing
Wales Which rules apply?
Building regulations are devolved in Wales, so fire safety design follows the Welsh Ministers' version of Approved Document B rather than the English one, alongside impact safety guidance for glazing.
The Regulatory Reform (Fire Safety) Order 2005 applies in Wales, so the responsible person must maintain fire-resisting glazing as part of the premises' fire safety measures. The Fire Safety Act 2021 confirmed this extends to the structure, external walls and flat entrance doors of multi-occupied residential buildings.
Wales is introducing its own building safety regime for occupied residential buildings, so check current Welsh requirements before planning major works to blocks of flats.
Frameless Fire-Rated Glazing by town in Mid Glamorgan
We cover frameless fire-rated glazing in Rhondda and across Mid Glamorgan, including Tonypandy, Bridgend, Merthyr Tydfil, Pontypridd.
Rhondda (CF42)Tonypandy (CF40)Bridgend (CF31)Merthyr Tydfil (CF47)Pontypridd (CF37)Aberdare (CF44)Maesteg (CF34)
FAQs for Mid Glamorgan
Is frameless more expensive than framed?
Yes, typically. It also needs more careful site protection.
How tall can frameless fire glass go?
Each system states a maximum height. We check your floor-to-ceiling height against it during design.
Is frameless fire-rated glass possible?
Yes, using tested butt-jointed systems, usually with insulating glass. It must be installed exactly to the tested details.
Do you cover all of Mid Glamorgan?
Yes. We take enquiries from across Mid Glamorgan, including Rhondda and Tonypandy, Bridgend, Merthyr Tydfil, Pontypridd, and arrange surveys to suit your programme.
Related
Related services in Mid Glamorgan
Process
How a Mid Glamorgan job runs
Tell us what you have
Send drawings, a fire risk assessment action or photos of the glass marks.
Measure and check
We measure each opening in Mid Glamorgan and check what the existing frames can accept.
Written quote
You receive a written quote naming the tested system and classification.
Fit and record
We install, photograph seals and fixings before closing up, and hand over the schedule.