Fire-Rated Glass Partitions
Office glass partitions where the wall has to be fire-resisting.
Learn more →From the SG1 district outwards, we arrange frameless fire-rated glazing for buildings across Stevenage, matching glass, frames and seals to tested evidence rather than guesswork.
Tell us what you need. We reply with next steps and a guide price.
Frameless fire-rated glazing is a glass wall where panes meet edge to edge with a tested sealant joint instead of vertical frames, held in discreet head and base channels. It gives an almost uninterrupted view while still being tested to resist fire.
The sealant, joint width and any interlayer in the joint come from the test. Generic silicone in a fire glass joint is not acceptable.
True frameless fire doors are rare; most frameless walls use a slim framed door within the run. We show you the options on drawings.
Maximum heights and the ability to form corners vary by system. Corners may need a post or a specific tested joint.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Our Hertfordshire coverage takes in Stevenage (SG1, SG4, SG2) and the neighbouring towns of Hitchin, Letchworth Garden City, Welwyn Garden City. Watford, around 31 km from Stevenage, is the largest town in the same coverage area.
We can phase work in Stevenage around residents, staff or pupils, with out-of-hours options.
Every quote in Stevenage identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
After survey you get a fixed written quote for the agreed scope, so Stevenage budgets are not open-ended.
We can survey and quote for blocks of flats, offices and other building types in Stevenage.
Yes, typically. It also needs more careful site protection.
Usually through a slim framed door set into the run, chosen so the combination is covered by evidence.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Yes. We survey and install in Stevenage and across Hertfordshire, including the SG1 district and nearby Hitchin.
Office glass partitions where the wall has to be fire-resisting.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Internal glazed screens that keep compartments and corridors protected.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We visit Stevenage to measure, record existing marks and check the frames and substrate.
You receive a written quote naming the tested system and classification.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.