Fire-Rated Glass Partitions
Office glass partitions where the wall has to be fire-resisting.
Learn more →When a fire strategy, inspection report or building control comment in Brentwood calls for glazing tested to resist fire, our frameless fire-rated glazing service covers survey, supply and installation.
Tell us what you need. We reply with next steps and a guide price.
Frameless fire-rated glazing is a glass wall where panes meet edge to edge with a tested sealant joint instead of vertical frames, held in discreet head and base channels. It gives an almost uninterrupted view while still being tested to resist fire.
We can phase work in Brentwood around residents, staff or pupils, with out-of-hours options.
Every quote in Brentwood identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
After survey you get a fixed written quote for the agreed scope, so Brentwood budgets are not open-ended.
True frameless fire doors are rare; most frameless walls use a slim framed door within the run. We show you the options on drawings.
Frameless fire glazing is at the top of the price range because of the glass and precision required.
Maximum heights and the ability to form corners vary by system. Corners may need a post or a specific tested joint.
We cover Brentwood and the surrounding postcode districts, including CM14, CM13, CM15. Nearby towns we also serve include Billericay, Hornchurch, Romford. Brentwood lies roughly 30 km from Southend-on-Sea, within our Essex coverage.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Frameless fire-rated glazing applies to many building types in Brentwood, including retail and leisure units and blocks of flats.
Usually through a slim framed door set into the run, chosen so the combination is covered by evidence.
Yes, using tested butt-jointed systems, usually with insulating glass. It must be installed exactly to the tested details.
Survey timing in Brentwood depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Office glass partitions where the wall has to be fire-resisting.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Internal glazed screens that keep compartments and corridors protected.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in Brentwood and check what the existing frames can accept.
You receive a written quote naming the tested system and classification.
Work is completed to the manufacturer's details and documented for your records.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.