Fire Door Vision Panels
Replacement and new vision panels fitted to the door's evidence.
Learn more →From the ME1 district outwards, we arrange fire-rated fanlights and side panels for buildings across Rochester, matching glass, frames and seals to tested evidence rather than guesswork.
Tell us what you need. We reply with next steps and a guide price.
These panels are common in flat entrance doors, communal corridors, schools and older buildings, and they are often found glazed with ordinary glass. We survey them, replace unsuitable glass, correct beads and seals, and supply complete rated frames where the existing frame cannot be upgraded.
Internal windows between rooms and corridors are a frequent survey finding in older offices and schools.
Grilles or openings in fanlights must be fire-rated or removed if the wall is fire-resisting.
In blocks of flats, the glazing around flat entrance doors forms part of the protection of the common parts and needs to match the door's performance.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Survey visits can be arranged anywhere in Rochester, including the ME1, ME4, ME2, ME7, ME5 districts, and in nearby Chatham, Strood, Gillingham. Maidstone, around 13 km from Rochester, is the largest town in the same coverage area.
Every quote in Rochester identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
After survey you get a fixed written quote for the agreed scope, so Rochester budgets are not open-ended.
If an existing frame in a Rochester building has no traceable evidence, we say so and price the options rather than guess.
Sector guides below cover blocks of flats, care homes and other buildings in Rochester.
Sometimes, if the existing frame is suitable. We check the frame before recommending glass-only replacement.
Yes. Glass within 300mm of a door edge and below 1500mm is a critical location for impact safety.
Yes. We survey and install in Rochester and across Kent, including the ME1 district and nearby Chatham.
Building work in Rochester follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Replacement and new vision panels fitted to the door's evidence.
Learn more →Hardwood screens and borrowed lights tested for fire.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →Replace old Georgian wired glass with modern fire glass.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We measure each opening in Rochester and check what the existing frames can accept.
We set out the system, glass, evidence and programme, with a fixed price.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.