Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →Aluminium fire-rated screens in Totton is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Aluminium fire-rated screens are glazed walls built from aluminium profiles that have been tested with fire-resistant glass and insulating inserts. They suit offices, healthcare and education buildings that want a clean, modern frame matching the rest of the glazing.
Some aluminium systems are tested for external facades, others for internal use only. We match the system to the position.
Aluminium systems are commonly available at 30 and 60 minutes; higher ratings are less common and may point to a steel system instead.
Head details and fixing centres come from the system documentation, especially beneath long-span slabs.
Coverage around Totton includes the SO40, SO16, SO15 districts and nearby Southampton, Hythe, Eastleigh. Totton lies roughly 6 km from Southampton, within our Hampshire coverage.
Every quote in Totton identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in Totton around residents, staff or pupils, with out-of-hours options.
After survey you get a fixed written quote for the agreed scope, so Totton budgets are not open-ended.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
We can survey and quote for blocks of flats, hotels and other building types in Totton.
Usually they can be matched closely in profile and colour so rated and non-rated areas look consistent.
Some systems are tested for external use. If the screen forms part of the building envelope we specify an external-rated system and glass.
Yes. We survey and install in Totton and across Hampshire, including the SO40 district and nearby Southampton.
Building work in Totton follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Internal glazed screens that keep compartments and corridors protected.
Learn more →Office glass partitions where the wall has to be fire-resisting.
Learn more →Facade glazing tested for fire where boundaries or compartments demand it.
Learn more →Slim steel frames for long spans, high ratings and heavy glass.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
A survey in Totton confirms sizes, access, existing evidence and fixing conditions.
You receive a written quote naming the tested system and classification.
Work is completed to the manufacturer's details and documented for your records.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.