Fire-Rated Glazed Screens
Internal glazed screens that keep compartments and corridors protected.
Learn more →We provide aluminium fire-rated screens in Crowborough and across East Sussex, working from the classification your building needs and handing over the evidence that proves what was fitted.
Tell us what you need. We reply with next steps and a guide price.
Aluminium softens at a lower temperature than steel, so fire-rated aluminium systems rely on specific internal inserts, reinforcements and glazing details. We install only the tested system as a whole, in anodised or powder-coated finishes, with doors and side panels where the evidence allows.
Every quote in Crowborough identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in Crowborough around residents, staff or pupils, with out-of-hours options.
After survey you get a fixed written quote for the agreed scope, so Crowborough budgets are not open-ended.
Aluminium fire screens can be visually matched to non-rated partitions elsewhere, so a floor reads as one design while only some walls are fire-rated.
Fire-rated aluminium profiles contain insulating and intumescent inserts that standard profiles do not. Swapping in a standard section to save cost removes the rating.
Head details and fixing centres come from the system documentation, especially beneath long-span slabs.
Survey visits can be arranged anywhere in Crowborough, including the TN6, TN3 districts, and in nearby Royal Tunbridge Wells, East Grinstead, Tonbridge. Crowborough is about 33 km from Brighton, the largest town in our East Sussex coverage.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Aluminium fire-rated screens applies to many building types in Crowborough, including public buildings and retail and leisure units.
Some systems are tested for external use. If the screen forms part of the building envelope we specify an external-rated system and glass.
Usually they can be matched closely in profile and colour so rated and non-rated areas look consistent.
Building work in Crowborough follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Survey timing in Crowborough depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Internal glazed screens that keep compartments and corridors protected.
Learn more →Office glass partitions where the wall has to be fire-resisting.
Learn more →Facade glazing tested for fire where boundaries or compartments demand it.
Learn more →Slim steel frames for long spans, high ratings and heavy glass.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We measure each opening in Crowborough and check what the existing frames can accept.
Your quote lists each item with its classification and the evidence it relies on.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.