Fire Glazing Remedial Works
Putting right the defects found in surveys and fire risk assessments.
Learn more →For Ashford (Kent) buildings, we supply, replace and check fire glazing surveys wherever the fire strategy depends on it, working to the tested system rather than the glass alone.
Tell us what you need. We reply with next steps and a guide price.
A fire glazing survey is a non-destructive inspection of the glazed screens, doors, panels and windows in fire-resisting walls, recording what glass and frames are installed, whether they appear consistent with the required rating, and what defects need putting right.
Our Kent coverage takes in Ashford (Kent) (TN24, TN23, TN25) and the neighbouring towns of Faversham, Canterbury, Folkestone. Maidstone, around 28 km from Ashford (Kent), is the largest town in the same coverage area.
We can re-inspect after remedial work and update the schedule.
Surveys often follow a fire risk assessment action. We address the specific items raised.
Unmarked or ordinary glass in fire-resisting walls, missing seals, painted-over intumescent strips, wrong beads and unsealed service holes are frequent findings.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
We can phase work in Ashford (Kent) around residents, staff or pupils, with out-of-hours options.
Every quote in Ashford (Kent) identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Sector guides below cover care homes, blocks of flats and other buildings in Ashford (Kent).
It can confirm what is visible and recorded, and identify defects. Proving a rating may need manufacturer evidence or an assessment from a test body.
Building owners, managing agents, those responsible for fire safety and contractors who need to know whether glazing in fire-resisting walls and doors is suitable.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Putting right the defects found in surveys and fire risk assessments.
Learn more →Replace old Georgian wired glass with modern fire glass.
Learn more →Cracked or broken fire glass replaced to the original specification.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We visit Ashford (Kent) to measure, record existing marks and check the frames and substrate.
Your quote lists each item with its classification and the evidence it relies on.
Work is completed to the manufacturer's details and documented for your records.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.