Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Fire glass replacement in Telford is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Broken fire glass replacement is the repair of cracked, shattered or damaged fire-resistant panes with glass of a type the frame's evidence allows, refitted with the correct beads and seals. A cracked fire pane may not perform as tested, so it should be made safe and replaced promptly.
When the original glass is no longer available, the replacement must be covered by the frame's evidence or an assessment.
Repeated breakage can point to frame movement, door slamming or impact from trolleys. We look at the cause.
Whoever is responsible for fire safety may need temporary measures until the new pane is fitted; we can advise on practical options.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Whether the building is in central Telford or the wider TF3, TF4, TF2, TF1, TF7 districts, we can survey and quote. We also cover Wellington, Shrewsbury, Wolverhampton. Telford is the main town we cover in Shropshire.
After survey you get a fixed written quote for the agreed scope, so Telford budgets are not open-ended.
Every quote in Telford identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
We can phase work in Telford around residents, staff or pupils, with out-of-hours options.
We can survey and quote for offices, student accommodation and other building types in Telford.
Lead times depend on the glass. Integrity glass is often quick to supply; insulating glass is made to size.
It may not perform as tested. Treat it as a defect and arrange replacement promptly.
Building work in Telford follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Survey timing in Telford depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Tell us the rating required, sizes and building type, or ask us to find out.
We visit Telford to measure, record existing marks and check the frames and substrate.
Your quote lists each item with its classification and the evidence it relies on.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.