Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Fire glass replacement in Strood is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
We identify the existing glass from its marks, measure the opening, make the area safe and fit the correct replacement. If the original product is no longer made, we source an alternative covered by the frame's evidence or advise on the right next step.
Survey visits can be arranged anywhere in Strood, including the ME2, ME1, ME4 districts, and in nearby Rochester, Chatham, Gillingham. Strood lies roughly 14 km from Maidstone, within our Kent coverage.
When the original glass is no longer available, the replacement must be covered by the frame's evidence or an assessment.
A broken pane can be a cut hazard and a gap in compartmentation. We can make it safe on the first visit while the replacement is cut.
Repeated breakage can point to frame movement, door slamming or impact from trolleys. We look at the cause.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
In higher-risk buildings, broadly 18 metres or seven storeys with two or more homes, the Building Safety Regulator is the building control authority. England is also phasing out BS 476 references from Approved Document B, with the remaining fire-resistance references due to go in September 2029.
Every quote in Strood identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
After survey you get a fixed written quote for the agreed scope, so Strood budgets are not open-ended.
You receive the classification references, glass marks and installation photographs for your fire safety records.
Fire glass replacement applies to many building types in Strood, including industrial units and public buildings.
Look for an etched or printed mark in a corner of the pane. Send us a photo with the approximate size.
Lead times depend on the glass. Integrity glass is often quick to supply; insulating glass is made to size.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Building work in Strood follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
A survey in Strood confirms sizes, access, existing evidence and fixing conditions.
You receive a written quote naming the tested system and classification.
Installation to the system details, then a handover pack with photographs and evidence.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.