Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →If a building in Folkestone needs fire glass replacement, the starting point is the rating its fire strategy requires. We confirm that, survey the openings and quote a tested system to suit.
Tell us what you need. We reply with next steps and a guide price.
Broken fire glass replacement is the repair of cracked, shattered or damaged fire-resistant panes with glass of a type the frame's evidence allows, refitted with the correct beads and seals. A cracked fire pane may not perform as tested, so it should be made safe and replaced promptly.
EI glass is laminated to size, so it can take longer to supply than integrity glass. We give you a realistic date.
Most fire glass is etched or printed with its product name and classification. A photo of the mark speeds up quoting.
A broken pane can be a cut hazard and a gap in compartmentation. We can make it safe on the first visit while the replacement is cut.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Coverage around Folkestone includes the CT19, CT20, CT50, CT18 districts and nearby Dover, Ashford, Deal. Folkestone is about 50 km from Maidstone, the largest town in our Kent coverage.
We can phase work in Folkestone around residents, staff or pupils, with out-of-hours options.
After survey you get a fixed written quote for the agreed scope, so Folkestone budgets are not open-ended.
If an existing frame in a Folkestone building has no traceable evidence, we say so and price the options rather than guess.
Sector guides below cover offices, public buildings and other buildings in Folkestone.
Yes. Single panes can be replaced on their own, provided the replacement is compatible with the frame's evidence.
Look for an etched or printed mark in a corner of the pane. Send us a photo with the approximate size.
We can give a guide range from photos and sizes, including a clear photo of any marks on the glass. A fixed price follows a survey.
Building work in Folkestone follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We measure each opening in Folkestone and check what the existing frames can accept.
Your quote lists each item with its classification and the evidence it relies on.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.