Fire-Resistant Glass
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Fire glass replacement in New Malden is usually needed for one of three reasons: new building work, a change to an existing fire-resisting wall, or defects found in an inspection. We handle all three.
Tell us what you need. We reply with next steps and a guide price.
Broken fire glass replacement is the repair of cracked, shattered or damaged fire-resistant panes with glass of a type the frame's evidence allows, refitted with the correct beads and seals. A cracked fire pane may not perform as tested, so it should be made safe and replaced promptly.
When the original glass is no longer available, the replacement must be covered by the frame's evidence or an assessment.
Repeated breakage can point to frame movement, door slamming or impact from trolleys. We look at the cause.
Whoever is responsible for fire safety may need temporary measures until the new pane is fitted; we can advise on practical options.
Survey visits can be arranged anywhere in New Malden, including the KT3, KT4, SW20, KT6, KT5, KT1 districts, and in nearby Surbiton, Morden, Wimbledon. New Malden is one of the Greater London districts we cover.
We can phase work in New Malden around residents, staff or pupils, with out-of-hours options.
If an existing frame in a New Malden building has no traceable evidence, we say so and price the options rather than guess.
Every quote in New Malden identifies the tested system: frame, glass, beads, seals and fixings, within its pane-size limits.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Sector guides below cover schools and colleges, blocks of flats and other buildings in New Malden.
Lead times depend on the glass. Integrity glass is often quick to supply; insulating glass is made to size.
Look for an etched or printed mark in a corner of the pane. Send us a photo with the approximate size.
Yes. We survey and install in New Malden and across Greater London, including the KT3 district and nearby Surbiton.
Building work in New Malden follows the Building Regulations 2010 and Approved Document B, and occupied buildings are covered by the Regulatory Reform (Fire Safety) Order 2005.
Integrity and insulating fire glass supplied and fitted into tested frames.
Learn more →Replacement and new vision panels fitted to the door's evidence.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →EI 30 to EI 120 glass that blocks heat as well as flames.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We visit New Malden to measure, record existing marks and check the frames and substrate.
Your quote lists each item with its classification and the evidence it relies on.
Work is completed to the manufacturer's details and documented for your records.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.